Enable full support (XHCI, EHCI, OHCI) for the upper USB3 port from Radxa Rock 5 Model A. The lower one is already supported. Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx> --- .../boot/dts/rockchip/rk3588s-rock-5a.dts | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts index 2002fd0221fa..f78d131a8ca8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -698,6 +698,14 @@ regulator-state-mem { }; }; +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + &u2phy2 { status = "okay"; }; @@ -721,6 +729,15 @@ &uart2 { status = "okay"; }; +&usbdp_phy0 { + status = "okay"; + rockchip,dp-lane-mux = <2 3>; +}; + +&usbdp_phy0_u3 { + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; pinctrl-names = "default"; @@ -731,6 +748,11 @@ &usb_host0_ohci { status = "okay"; }; +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +}; + &usb_host1_ehci { status = "okay"; }; -- 2.43.0