Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/riscv/boot/dts/starfive/jh7100.dtsi | 12 ++++++------
arch/riscv/boot/dts/starfive/jh7110.dtsi | 4 ++--
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
index 14d553047e84..90149e379c10 100644
--- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -96,14 +96,14 @@ cpu-thermal {
thermal-sensors = <&sfctemp>;
trips {
- cpu_alert0 {
+ cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit {
+ cpu-crit {
/* milliCelsius */
temperature = <90000>;
hysteresis = <2000>;
@@ -113,28 +113,28 @@ cpu_crit {
};
};
- osc_sys: osc_sys {
+ osc_sys: osc-sys {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
- osc_aud: osc_aud {
+ osc_aud: osc-aud {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
- gmac_rmii_ref: gmac_rmii_ref {
+ gmac_rmii_ref: gmac-rmii-ref {
compatible = "fixed-clock";
#clock-cells = <0>;
/* Should be overridden by the board when needed */
clock-frequency = <0>;
};
- gmac_gr_mii_rxclk: gmac_gr_mii_rxclk {
+ gmac_gr_mii_rxclk: gmac-gr-mii-rxclk {
compatible = "fixed-clock";
#clock-cells = <0>;
/* Should be overridden by the board when needed */
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 1b782f2c1395..8e7f5dec6286 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -237,14 +237,14 @@ map0 {
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit {
+ cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
--
2.34.1
