[PATCH v8 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property

[Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>]

From: Srinivas Goud <srinivas.goud@xxxxxxx>

ECC feature added to CAN TX_OL, TX_TL and RX FIFOs of Xilinx AXI CAN
Controller.

ECC is an IP configuration option where counter registers are added in
IP for 1bit/2bit ECC errors.

'xlnx,has-ecc' is an optional property and added to Xilinx AXI CAN
Controller node if ECC block enabled in the HW

Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Signed-off-by: Srinivas Goud <srinivas.goud@xxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/net/can/xilinx,can.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
index 64d57c343e6f..8d4e5af6fd6c 100644
--- a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
+++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
@@ -49,6 +49,10 @@ properties:
   resets:
     maxItems: 1
 
+  xlnx,has-ecc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: CAN TX_OL, TX_TL and RX FIFOs have ECC support(AXI CAN)
+
 required:
   - compatible
   - reg
@@ -137,6 +141,7 @@ examples:
         interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
         tx-fifo-depth = <0x40>;
         rx-fifo-depth = <0x40>;
+        xlnx,has-ecc;
     };
 
   - |

-- 
2.43.0