Add flexcom 10 node for usage on the SAMA7G54 Curiosity board. Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx> --- arch/arm/boot/dts/microchip/sama7g5.dtsi | 26 ++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi index 269e0a3ca269..c90e404e8ed9 100644 --- a/arch/arm/boot/dts/microchip/sama7g5.dtsi +++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi @@ -958,6 +958,32 @@ i2c9: i2c@600 { }; }; + flx10: flexcom@e2820000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xe2820000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 48>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe2820000 0x800>; + status = "disabled"; + + i2c10: i2c@600 { + compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 48>; + atmel,fifo-size = <32>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(25)>, + <&dma0 AT91_XDMAC_DT_PERID(26)>; + dma-names = "rx", "tx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + }; + flx11: flexcom@e2824000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xe2824000 0x200>; -- 2.43.0