[PATCH v2 0/2] Add DT support for Multiport controller on SC8280XP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Series [1] introduces binding and driver support for DWC3 Multiport
controllers. This series adds support for tertiary controller of SC8280
and enabled multiport controller for SA8295P-ADP platform.

Till v13 the DT was pushed along with driver code. Separate the DT changes
from driver update and pushing it as this series.

Changes in v2:
SA8540 Ride related code changes have been dropped and will pushed later
due to unavailability of hardware with either Andrew or me for testing the
gpio hog changes suggested in v1.
Implemented vbus boost regulators as fixed regulators instead of modelling
their enable pins as pinctrl nodes.

Link to v1:
https://lore.kernel.org/all/20240206114745.1388491-1-quic_kriskura@xxxxxxxxxxx/

[1]: https://lore.kernel.org/all/20240206051825.1038685-1-quic_kriskura@xxxxxxxxxxx/

Krishna Kurapati (2):
  arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB
    ports

 arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 83 ++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi   | 82 +++++++++++++++++++++++
 2 files changed, 165 insertions(+)

-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux