Dne nedelja, 11. februar 2024 ob 09:17:37 CET je Jisheng Zhang napisal(a): > Add Sipeed Longan SoM 3H and Longan Pi 3H board support. > > The Sipeed Longan SoM 3H is a system on module based on the Allwinner > H618 SoC. The SoM features: > > - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU > - 2/4 GiB LPDDR4 DRAM SoMs > - AXP313a PMIC > - eMMC > > The Sipeed Longan PI 3H is a development board based on the above SoM. > The board features: > - Longan SoM 3H > - Raspberry-Pi-1 compatible GPIO header > - 2 USB 2.0 host port > - 1 USB 2.0 type C port (power supply + OTG) > - MicroSD slot > - 1Gbps Ethernet port (via RTL8211 PHY) > - HDMI port > - WiFi/BT chip Merged, thanks! Best regards, Jernej > > Since v2: > - collect Reviewed-by tag > - add vin-supply property to reg_vcc3v3 > - fix reg_vcc3v3 voltage value > - remove "interrupt-parent" and "interrupts" properties from axp313 > node > > Since v1: > - Use const rather than enum for "sipeed,longan-pi-3h" dt-binding > - remove dts-v1, model and compatible from SoM dtsi > - add interrupt related properties to axp313 dt node > - use "vcc-1v8-pll" and "vcc-3v3-io" as regulator name > - add dt node for board's discrete 5V->3.3V regulator and use it for > eth\tfcard 3.3v supply > - add usb2_vbus-supply property > > > Jisheng Zhang (2): > dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H > arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board > support > > .../devicetree/bindings/arm/sunxi.yaml | 6 + > arch/arm64/boot/dts/allwinner/Makefile | 1 + > .../sun50i-h618-longan-module-3h.dtsi | 75 +++++++++ > .../dts/allwinner/sun50i-h618-longanpi-3h.dts | 144 ++++++++++++++++++ > 4 files changed, 226 insertions(+) > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts > >
