Re: [PATCH v4 03/20] drivers: crypto: meson: make CLK controller optional

[neil.armstrong@xxxxxxxxxx]

On 12/02/2024 14:50, Alexey Romanov wrote:
> Amlogic crypto IP doesn't take a clock input on some
> SoCs: AXG / A1 / S4 / G12. So make it optional.
>
> Signed-off-by: Alexey Romanov <avromanov@xxxxxxxxxxxxxxxxx>
> ---
>   drivers/crypto/amlogic/amlogic-gxl-core.c | 21 ++++++++-------------
>   drivers/crypto/amlogic/amlogic-gxl.h      |  2 ++
>   2 files changed, 10 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/crypto/amlogic/amlogic-gxl-core.c b/drivers/crypto/amlogic/amlogic-gxl-core.c
> index 4d1b1d5b7a54..54113c524ec5 100644
> --- a/drivers/crypto/amlogic/amlogic-gxl-core.c
> +++ b/drivers/crypto/amlogic/amlogic-gxl-core.c
> @@ -250,6 +250,7 @@ static void meson_unregister_algs(struct meson_dev *mc)
>   static const struct meson_pdata meson_gxl_pdata = {
>   	.descs_reg = 0x0,
>   	.status_reg = 0x4,
> +	.need_clk = true,
>   };
>   
>   static const struct of_device_id meson_crypto_of_match_table[] = {
> @@ -285,17 +286,14 @@ static int meson_crypto_probe(struct platform_device *pdev)
>   		dev_err(&pdev->dev, "Cannot request MMIO err=%d\n", err);
>   		return err;
>   	}
> -	mc->busclk = devm_clk_get(&pdev->dev, "blkmv");
> -	if (IS_ERR(mc->busclk)) {
> -		err = PTR_ERR(mc->busclk);
> -		dev_err(&pdev->dev, "Cannot get core clock err=%d\n", err);
> -		return err;
> -	}
>   
> -	err = clk_prepare_enable(mc->busclk);
> -	if (err != 0) {
> -		dev_err(&pdev->dev, "Cannot prepare_enable busclk\n");
> -		return err;
> +	if (mc->pdata->need_clk) {
> +		mc->busclk = devm_clk_get_enabled(&pdev->dev, "blkmv");
> +		if (IS_ERR(mc->busclk)) {
> +			err = PTR_ERR(mc->busclk);
> +			dev_err(&pdev->dev, "Cannot get and enable core clock err=%d\n", err);
> +			return err;
> +		}
>   	}
>   
>   	err = meson_allocate_chanlist(mc);
> @@ -322,7 +320,6 @@ static int meson_crypto_probe(struct platform_device *pdev)
>   	meson_unregister_algs(mc);
>   error_flow:
>   	meson_free_chanlist(mc, mc->flow_cnt - 1);
> -	clk_disable_unprepare(mc->busclk);
>   	return err;
>   }
>   
> @@ -337,8 +334,6 @@ static void meson_crypto_remove(struct platform_device *pdev)
>   	meson_unregister_algs(mc);
>   
>   	meson_free_chanlist(mc, mc->flow_cnt - 1);
> -
> -	clk_disable_unprepare(mc->busclk);
>   }
>   
>   static struct platform_driver meson_crypto_driver = {
> diff --git a/drivers/crypto/amlogic/amlogic-gxl.h b/drivers/crypto/amlogic/amlogic-gxl.h
> index 9ad75da214ff..a36b9bac63a0 100644
> --- a/drivers/crypto/amlogic/amlogic-gxl.h
> +++ b/drivers/crypto/amlogic/amlogic-gxl.h
> @@ -82,10 +82,12 @@ struct meson_flow {
>    * struct meson_pdata - SoC series dependent data.
>    * @reg_descs:	offset to descriptors register
>    * @reg_status:	offset to status register
> + * @need_clk:	clock input is needed
>    */
>   struct meson_pdata {
>   	u32 descs_reg;
>   	u32 status_reg;
> +	bool need_clk;
>   };
>   
>   /*

You may use devm_clk_get_optional_enabled() instead, bindings will ensure
clock is provided when needed.

With this you can also drop the clk_disable_unprepare() in meson_crypto_remove().

Neil