The switch address in the node name is in hex while the address in the reg
property is decimal which is wrong. Fix that and write the reg address
as a hexadecimal number.
Fixes: 15b43e497ffd ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx>
---
arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index cfb0fc924b42..5763f8253d51 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -143,7 +143,7 @@
switch@10 {
compatible = "qca,qca8334";
- reg = <10>;
+ reg = <0x10>;
reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
switch_ports: ports {
--
2.1.4
