The example DTS should be indented with two or four (preferred) spaces,
as mentioned in Writing Schema document. While re-indenting, change the
node names to somehow generic names, as expected by Devicetree
specification.
Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../auxdisplay/arm,versatile-lcd.yaml | 4 +-
.../bindings/auxdisplay/hit,hd44780.yaml | 44 ++++++++--------
.../bindings/auxdisplay/holtek,ht16k33.yaml | 50 +++++++++----------
.../bindings/auxdisplay/img,ascii-lcd.yaml | 4 +-
4 files changed, 51 insertions(+), 51 deletions(-)
diff --git a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
index 5d02bd032a85..439f7b811a94 100644
--- a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
@@ -39,6 +39,6 @@ additionalProperties: false
examples:
- |
lcd@10008000 {
- compatible = "arm,versatile-lcd";
- reg = <0x10008000 0x1000>;
+ compatible = "arm,versatile-lcd";
+ reg = <0x10008000 0x1000>;
};
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
index 73d07f2cb303..1c7fd29bbcc7 100644
--- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -84,32 +84,32 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- auxdisplay {
- compatible = "hit,hd44780";
+ display-controller {
+ compatible = "hit,hd44780";
- data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
- <&hc595 1 GPIO_ACTIVE_HIGH>,
- <&hc595 2 GPIO_ACTIVE_HIGH>,
- <&hc595 3 GPIO_ACTIVE_HIGH>;
- enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+ data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+ <&hc595 1 GPIO_ACTIVE_HIGH>,
+ <&hc595 2 GPIO_ACTIVE_HIGH>,
+ <&hc595 3 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+ rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
- display-height-chars = <2>;
- display-width-chars = <16>;
+ display-height-chars = <2>;
+ display-width-chars = <16>;
};
- |
#include <dt-bindings/gpio/gpio.h>
- hd44780 {
- compatible = "hit,hd44780";
- display-height-chars = <2>;
- display-width-chars = <16>;
- data-gpios = <&pcf8574 4 0>,
- <&pcf8574 5 0>,
- <&pcf8574 6 0>,
- <&pcf8574 7 0>;
- enable-gpios = <&pcf8574 2 0>;
- rs-gpios = <&pcf8574 0 0>;
- rw-gpios = <&pcf8574 1 0>;
- backlight-gpios = <&pcf8574 3 0>;
+ display-controller {
+ compatible = "hit,hd44780";
+ display-height-chars = <2>;
+ display-width-chars = <16>;
+ data-gpios = <&pcf8574 4 0>,
+ <&pcf8574 5 0>,
+ <&pcf8574 6 0>,
+ <&pcf8574 7 0>;
+ enable-gpios = <&pcf8574 2 0>;
+ rs-gpios = <&pcf8574 0 0>;
+ rw-gpios = <&pcf8574 1 0>;
+ backlight-gpios = <&pcf8574 3 0>;
};
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index be95f6b97b41..b90eec2077b4 100644
--- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -74,31 +74,31 @@ examples:
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- ht16k33: ht16k33@70 {
- compatible = "holtek,ht16k33";
- reg = <0x70>;
- refresh-rate-hz = <20>;
- interrupt-parent = <&gpio4>;
- interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
- debounce-delay-ms = <50>;
- linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
- <MATRIX_KEY(3, 0, KEY_F8)>,
- <MATRIX_KEY(4, 0, KEY_F10)>,
- <MATRIX_KEY(5, 0, KEY_F4)>,
- <MATRIX_KEY(6, 0, KEY_F2)>,
- <MATRIX_KEY(2, 1, KEY_F5)>,
- <MATRIX_KEY(3, 1, KEY_F7)>,
- <MATRIX_KEY(4, 1, KEY_F9)>,
- <MATRIX_KEY(5, 1, KEY_F3)>,
- <MATRIX_KEY(6, 1, KEY_F1)>;
+ display-controller@70 {
+ compatible = "holtek,ht16k33";
+ reg = <0x70>;
+ refresh-rate-hz = <20>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+ debounce-delay-ms = <50>;
+ linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
+ <MATRIX_KEY(3, 0, KEY_F8)>,
+ <MATRIX_KEY(4, 0, KEY_F10)>,
+ <MATRIX_KEY(5, 0, KEY_F4)>,
+ <MATRIX_KEY(6, 0, KEY_F2)>,
+ <MATRIX_KEY(2, 1, KEY_F5)>,
+ <MATRIX_KEY(3, 1, KEY_F7)>,
+ <MATRIX_KEY(4, 1, KEY_F9)>,
+ <MATRIX_KEY(5, 1, KEY_F3)>,
+ <MATRIX_KEY(6, 1, KEY_F1)>;
- led {
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_BACKLIGHT;
- linux,default-trigger = "backlight";
- };
+ led {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_BACKLIGHT;
+ linux,default-trigger = "backlight";
};
- };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
index 1899b23de7d1..55e9831b3f67 100644
--- a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
@@ -50,6 +50,6 @@ additionalProperties: false
examples:
- |
lcd: lcd@17fff000 {
- compatible = "img,boston-lcd";
- reg = <0x17fff000 0x8>;
+ compatible = "img,boston-lcd";
+ reg = <0x17fff000 0x8>;
};
--
2.34.1
