On Sun, 11 Feb 2024 21:51:58 +0100, Ondřej Jirman wrote: > From: Icenowy Zheng <icenowy@xxxxxxx> > > Voltafield AF8133J is a simple magnetometer sensor produced by Voltafield > Technology Corp, with dual power supplies (one for core and one for I/O) > and active-low reset pin. > > The sensor has configurable range 1.2 - 2.2 mT and a software controlled > standby mode. > > Add a device tree binding for it. > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> > Signed-off-by: Ondřej Jirman <megi@xxxxxx> > --- > .../iio/magnetometer/voltafield,af8133j.yaml | 58 +++++++++++++++++++ > 1 file changed, 58 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml: properties:compatible: ['voltafield,af8133j'] is not of type 'object', 'boolean' from schema $id: http://json-schema.org/draft-07/schema# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml: properties:compatible: ['voltafield,af8133j'] is not of type 'object', 'boolean' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml: ignoring, error in schema: properties: compatible Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.example.dtb: /example-0/i2c/magnetometer@1c: failed to match any schema with compatible: ['voltafield,af8133j'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240211205211.2890931-3-megi@xxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
