Add QCA8075 PHY Package nodes. The PHY nodes that were previously
defined never worked and actually never had a driver to correctly setup
these PHY. Now that we have a correct driver, correctly add the PHY
Package node and set the default value of 300mw for tx driver strength
following specification of ipq4019 SoC.
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 35 +++++++++++++++---------
1 file changed, 22 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index f989bd741cd1..6c97d852d342 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -603,24 +603,33 @@ mdio: mdio@90000 {
reg = <0x90000 0x64>;
status = "disabled";
- ethphy0: ethernet-phy@0 {
+ ethernet-phy-package@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,qca8075-package";
reg = <0>;
- };
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- };
+ qcom,tx-drive-strength-milliwatt = <300>;
- ethphy2: ethernet-phy@2 {
- reg = <2>;
- };
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
- ethphy3: ethernet-phy@3 {
- reg = <3>;
- };
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
- ethphy4: ethernet-phy@4 {
- reg = <4>;
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
};
};
--
2.43.0
