Re: [PATCH 03/22] dt-bindings: usb: Add downstream facing ports to realtek binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 09 Feb 2024 23:09:14 -0800, Stephen Boyd wrote:
> Add a graph with 4 output endpoints to this hub binding to support the
> scenario where a downstream facing port is connected to a device that
> isn't a connector or a USB device with a VID:PID. This will be used to
> connect downstream facing ports to USB type-c switches so the USB
> superspeed and high speed lanes can be put onto USB connectors.
> 
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
> Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
> Cc: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> Cc: <linux-usb@xxxxxxxxxxxxxxx>
> Cc: <devicetree@xxxxxxxxxxxxxxx>
> Cc: Pin-yen Lin <treapking@xxxxxxxxxxxx>
> Cc: maciek swiech <drmasquatch@xxxxxxxxxx>
> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> ---
>  .../bindings/usb/realtek,rts5411.yaml         | 50 +++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/usb/realtek,rts5411.example.dts:32.21-31: Warning (reg_format): /example-0/usb/hub@1/device@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/usb/realtek,rts5411.example.dts:30.26-33.19: Warning (avoid_default_addr_size): /example-0/usb/hub@1/device@2: Relying on default #address-cells value
Documentation/devicetree/bindings/usb/realtek,rts5411.example.dts:30.26-33.19: Warning (avoid_default_addr_size): /example-0/usb/hub@1/device@2: Relying on default #size-cells value
Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
Documentation/devicetree/bindings/usb/realtek,rts5411.example.dts:43.23-50.19: Warning (graph_port): /example-0/usb/hub@2/ports: graph port node name should be 'port'
Documentation/devicetree/bindings/usb/realtek,rts5411.example.dts:46.28-49.23: Warning (graph_endpoint): /example-0/usb/hub@2/ports/port@0: graph endpoint node name should be 'endpoint'

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240210070934.2549994-4-swboyd@xxxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux