Add bindings for the MediaTek XFI Ethernet SerDes T-PHY found in the
MediaTek MT7988 SoC which can operate at various interfaces modes:
via USXGMII PCS:
* USXGMII
* 10GBase-R
* 5GBase-R
via LynxI SGMII PCS:
* 2500Base-X
* 1000Base-X
* Cisco SGMII (MAC side)
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
v3: Add reference to MediaTek-internal "pextp" name, better explain reset as
well as 10GBase-R tuning work-around.
v2: unify filename and compatible as requested
.../phy/mediatek,mt7988-xfi-tphy.yaml | 80 +++++++++++++++++++
1 file changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml
diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml
new file mode 100644
index 0000000000000..c0ab444f9c687
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,mt7988-xfi-tphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7988 XFI T-PHY
+
+maintainers:
+ - Daniel Golle <daniel@xxxxxxxxxxxxxx>
+
+description:
+ The MediaTek XFI SerDes T-PHY provides the physical SerDes lanes
+ used by the (10G/5G) USXGMII PCS and (1G/2.5G) LynxI PCS found in
+ MediaTek's 10G-capabale MT7988 SoC.
+ In MediaTek's SDK sources, this unit is referred to as "pextp".
+
+properties:
+ compatible:
+ const: mediatek,mt7988-xfi-tphy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: XFI PHY clock
+ - description: XFI register clock
+
+ clock-names:
+ items:
+ - const: xfipll
+ - const: topxtal
+
+ resets:
+ items:
+ - description: Reset controller corresponding to the phy instance.
+
+ mediatek,usxgmii-performance-errata:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ One instance of the T-PHY on MT7988 suffers from a performance
+ problem in 10GBase-R mode which needs a work-around in the driver.
+ This flag enables a work-around ajusting an analog phy setting and
+ is required for XFI Port0 of the MT7988 SoC to be in compliance with
+ the SFP specification.
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mediatek,mt7988-clk.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ phy@11f20000 {
+ compatible = "mediatek,mt7988-xfi-tphy";
+ reg = <0 0x11f20000 0 0x10000>;
+ clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+ <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>;
+ clock-names = "xfipll", "topxtal";
+ resets = <&watchdog 14>;
+ mediatek,usxgmii-performance-errata;
+ #phy-cells = <0>;
+ };
+ };
+
+...
--
2.43.0
