The tps659413 node set WKUP_GPIO0_7 (G28) pin as input to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as "interrupts" property. Replace 9 by 7 after checking in the board schematic [1]. [1] https://www.ti.com/tool/SK-TDA4VM Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs") Cc: Neha Malcom Francis <n-francis@xxxxxx> Signed-off-by: Romain Naour <romain.naour@xxxxxxxx> --- arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 188dfe291a32..6a8866055f77 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -574,7 +574,7 @@ tps659413: pmic@48 { pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins_default>; interrupt-parent = <&wkup_gpio0>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; ti,primary-pmic; -- 2.43.0
