There are SoCs that configure different FIFO depths for their instances
of the SPI IP. See the fifo_lvl_mask defined for exynos4_spi_port_config
for example:
.fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F },
The first instance of the IP is configured with 256 bytes FIFOs, whereas
the last two are configured with 64 bytes FIFOs.
Instead of mangling with the .fifo_lvl_mask and its dependency of the DT
alias ID, allow such SoCs to determine the FIFO depth via the
``fifo-depth`` DT property.
Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
---
drivers/spi/spi-s3c64xx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 72572e23cde5..b1c63f75021d 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1263,7 +1263,9 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
sdd->port_id = pdev->id;
}
- sdd->fifo_depth = FIFO_DEPTH(sdd);
+ if (of_property_read_u32(pdev->dev.of_node, "fifo-depth",
+ &sdd->fifo_depth))
+ sdd->fifo_depth = FIFO_DEPTH(sdd);
s3c64xx_spi_set_fifomask(sdd);
--
2.43.0.687.g38aa6559b0-goog
