Hi Nathan, Thanks for the patch. On Feb 07, 2024 at 09:28:20 -0800, Nathan Morrisson wrote: > The phyBOARD-Lyra has a GPIO fan header. This overlay enables the fan > header and sets the fan to turn on at 65C. > > Signed-off-by: Nathan Morrisson <nmorrisson@xxxxxxxxxx> > --- > arch/arm64/boot/dts/ti/Makefile | 1 + > .../ti/k3-am62-phyboard-lyra-gpio-fan.dtso | 51 +++++++++++++++++++ > 2 files changed, 52 insertions(+) > create mode 100644 arch/arm64/boot/dts/ti/k3-am62-phyboard-lyra-gpio-fan.dtso > > diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile > index 52c1dc910308..379fb4f31a1f 100644 > --- a/arch/arm64/boot/dts/ti/Makefile > +++ b/arch/arm64/boot/dts/ti/Makefile > @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb > dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb > dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb > dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb > +dtb-$(CONFIG_ARCH_K3) += k3-am62-phyboard-lyra-gpio-fan.dtbo You can also add a compile time test, to check if this applies cleanly on your phyboard base DTB. Please see the "Build time test only, enabled by CONFIG_OF_ALL_DTBS" section below in this file. > > # Boards with AM62Ax SoC > dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb > diff --git a/arch/arm64/boot/dts/ti/k3-am62-phyboard-lyra-gpio-fan.dtso b/arch/arm64/boot/dts/ti/k3-am62-phyboard-lyra-gpio-fan.dtso > new file mode 100644 > index 000000000000..9c05748bdd9d > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-am62-phyboard-lyra-gpio-fan.dtso > @@ -0,0 +1,51 @@ > +// SPDX-License-Identifier: GPL-2.0-only OR MIT > +/* > + * Copyright (C) 2024 PHYTEC America LLC > + * Author: Garrett Giordano <ggiordano@xxxxxxxxxx> > + */ > + > +/dts-v1/; > +/plugin/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/thermal/thermal.h> > +#include "k3-pinctrl.h" > + > +&{/} { > + fan: gpio-fan { > + compatible = "gpio-fan"; > + gpio-fan,speed-map = <0 0 8600 1>; > + gpios = <&main_gpio0 40 GPIO_ACTIVE_LOW>; > + #cooling-cells = <2>; > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_fan_pins_default>; > + status = "okay"; > + }; > +}; > + > +&main_pmx0 { > + gpio_fan_pins_default: gpio-fan-default-pins { > + pinctrl-single,pins = < > + AM62X_IOPAD(0x0a4, PIN_OUTPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */ > + >; > + }; > +}; > + > +&thermal_zones { > + main0_thermal: main0-thermal { > + trips { > + main0_thermal_trip0: main0-thermal-trip { > + temperature = <65000>; /* millicelsius */ > + hysteresis = <2000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&main0_thermal_trip0>; > + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > +}; > -- > 2.25.1 > -- Thanks, Jai GPG Fingerprint: 4DE0 D818 E5D5 75E8 D45A AFC5 43DE 91F9 249A 7145
Attachment:
signature.asc
Description: PGP signature