Add i2c devices for the CV180x, CV181x and SG200x soc.
Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxxxx>
---
arch/riscv/boot/dts/sophgo/cv18xx.dtsi | 55 ++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
index 71965cced56f..9bd9e70ca039 100644
--- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
@@ -132,6 +132,61 @@ portd: gpio-controller@0 {
};
};
+ i2c0: i2c@4000000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x04000000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>;
+ clock-names = "ref", "pclk";
+ interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@4010000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x04010000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>;
+ clock-names = "ref", "pclk";
+ interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@4020000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x04020000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>;
+ clock-names = "ref", "pclk";
+ interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@4030000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x04030000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>;
+ clock-names = "ref", "pclk";
+ interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@4040000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x04040000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>;
+ clock-names = "ref", "pclk";
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
uart0: serial@4140000 {
compatible = "snps,dw-apb-uart";
reg = <0x04140000 0x100>;
--
2.43.0
