Add sdhci2 DT node in k3-am62a-main for mmc2. Add otap/itap values according to the datasheet[0], Refer to Table 7-97. [0] https://www.ti.com/lit/ds/symlink/am62a3.pdf Signed-off-by: Judith Mendez <jm@xxxxxx> --- arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 24 +++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index ce5f278235a4..6806288ec227 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -579,6 +579,30 @@ sdhci1: mmc@fa00000 { status = "disabled"; }; + sdhci2: mmc@fa20000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0xfa20000 0x00 0x260>, <0x00 0xfa28000 0x00 0x134>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; + clock-names = "clk_ahb", "clk_xin"; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; + no-1-8-v; + status = "disabled"; + }; + usbss0: dwc3-usb@f900000 { compatible = "ti,am62-usb"; reg = <0x00 0x0f900000 0x00 0x800>; -- 2.43.0
