Rename 'snps,host-vbus-glitches-quirk' to 'snps,host-vbus-glitches'. Just describe the problem in the binding. So needn't 'quirk'. Update description. Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 8f5d250070c78..6685e6579e64c 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -273,11 +273,12 @@ properties: with an external supply. type: boolean - snps,host-vbus-glitches-quirk: + snps,host-vbus-glitches: description: When set, power off all Root Hub ports immediately after setting host mode to avoid vbus (negative) glitch happen in later - xhci reset. And the vbus will back to 5V automatically when reset done. + xhci reset. And the vbus will return to 5V automatically when reset + done. type: boolean snps,is-utmi-l1-suspend: -- 2.34.1