Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 7 Feb 2024 at 12:42, Krishna chaitanya chundru
<quic_krichai@xxxxxxxxxxx> wrote:
>
> Enable PCIe1 controller and its corresponding PHY nodes on
> qcs6490-rb3g2 platform.
>
> PCIe switch is connected to PCIe1, PCIe switch has multiple endpoints
> connected. For each endpoint a unique BDF will be assigned and should
> assign unique smmu id. So for each BDF add smmu id.
>
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 42 ++++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index 8bb7d13d85f6..0082a3399453 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -413,6 +413,32 @@ vreg_bob_3p296: bob {
>         };
>  };
>
> +&pcie1 {
> +       perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
> +
> +       pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
> +       pinctrl-names = "default";
> +
> +       iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
> +                   <0x100 &apps_smmu 0x1c81 0x1>,
> +                   <0x208 &apps_smmu 0x1c84 0x1>,
> +                   <0x210 &apps_smmu 0x1c85 0x1>,
> +                   <0x218 &apps_smmu 0x1c86 0x1>,
> +                   <0x300 &apps_smmu 0x1c87 0x1>,
> +                   <0x400 &apps_smmu 0x1c88 0x1>,
> +                   <0x500 &apps_smmu 0x1c89 0x1>,
> +                   <0x501 &apps_smmu 0x1c90 0x1>;

Is the iommu-map really board specific?

> +
> +       status = "okay";
> +};
> +
> +&pcie1_phy {
> +       vdda-phy-supply = <&vreg_l10c_0p88>;
> +       vdda-pll-supply = <&vreg_l6b_1p2>;
> +
> +       status = "okay";
> +};
> +
>  &qupv3_id_0 {
>         status = "okay";
>  };
> @@ -420,6 +446,22 @@ &qupv3_id_0 {
>  &tlmm {
>         gpio-reserved-ranges = <32 2>, /* ADSP */
>                                <48 4>; /* NFC */
> +
> +       pcie1_reset_n: pcie1-reset-n-state {
> +               pins = "gpio2";
> +               function = "gpio";
> +               drive-strength = <16>;
> +               output-low;
> +               bias-disable;
> +       };
> +
> +       pcie1_wake_n: pcie1-wake-n-state {
> +               pins = "gpio3";
> +               function = "gpio";
> +               drive-strength = <2>;
> +               bias-pull-up;
> +       };
> +
>  };
>
>  &uart5 {
>
> ---
> base-commit: 70d201a40823acba23899342d62bc2644051ad2e
> change-id: 20240207-enable_pcie-95b1d6612b27
>
> Best regards,
> --
> Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
>
>


-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux