Convert the Atmel capacitive touchscreen bindings to YAML format.
Signed-off-by: Dharma Balasubiramani <dharma.b@xxxxxxxxxxxxx>
---
.../bindings/input/atmel,captouch.txt | 36 -----------
.../bindings/input/atmel,captouch.yaml | 62 +++++++++++++++++++
2 files changed, 62 insertions(+), 36 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/atmel,captouch.txt
create mode 100644 Documentation/devicetree/bindings/input/atmel,captouch.yaml
diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.txt b/Documentation/devicetree/bindings/input/atmel,captouch.txt
deleted file mode 100644
index fe9ee5c53bcc..000000000000
--- a/Documentation/devicetree/bindings/input/atmel,captouch.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device tree bindings for Atmel capacitive touch device, typically
-an Atmel touch sensor connected to AtmegaXX MCU running firmware
-based on Qtouch library.
-
-The node for this device must be a child of a I2C controller node, as the
-device communicates via I2C.
-
-Required properties:
-
- compatible: Must be "atmel,captouch".
- reg: The I2C slave address of the device.
- interrupts: Property describing the interrupt line the device
- is connected to. The device only has one interrupt
- source.
- linux,keycodes: Specifies an array of numeric keycode values to
- be used for reporting button presses. The array can
- contain up to 8 entries.
-
-Optional properties:
-
- autorepeat: Enables the Linux input system's autorepeat
- feature on the input device.
-
-Example:
-
- atmel-captouch@51 {
- compatible = "atmel,captouch";
- reg = <0x51>;
- interrupt-parent = <&tlmm>;
- interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
- linux,keycodes = <BTN_0>, <BTN_1>,
- <BTN_2>, <BTN_3>,
- <BTN_4>, <BTN_5>,
- <BTN_6>, <BTN_7>;
- autorepeat;
- };
diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.yaml b/Documentation/devicetree/bindings/input/atmel,captouch.yaml
new file mode 100644
index 000000000000..5d5679896bc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,captouch.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/atmel,captouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel capacitive touch device
+
+maintainers:
+ - Dharma balasubiramani <dharma.b@xxxxxxxxxxxxx>
+
+description:
+ Atmel capacitive touch device, typically an Atmel touch sensor connected to
+ AtmegaXX MCU running firmware based on Qtouch library.
+
+allOf:
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ const: atmel,captouch
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ linux,keycodes:
+ minItems: 1
+ maxItems: 8
+
+ autorepeat:
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - linux,keycodes
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/input/linux-event-codes.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel-captouch@51 {
+ compatible = "atmel,captouch";
+ reg = <0x51>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+ linux,keycodes = <BTN_0>, <BTN_1>,
+ <BTN_2>, <BTN_3>,
+ <BTN_4>, <BTN_5>,
+ <BTN_6>, <BTN_7>;
+ autorepeat;
+ };
+ };
--
2.25.1
