Convert layerscape pcie bind document to yaml file. Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- .../bindings/pci/fsl,layerscape-pcie-ep.yaml | 84 +++++++++ .../bindings/pci/fsl,layerscape-pcie.yaml | 163 ++++++++++++++++++ .../bindings/pci/layerscape-pci.txt | 79 --------- 3 files changed, 247 insertions(+), 79 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml delete mode 100644 Documentation/devicetree/bindings/pci/layerscape-pci.txt diff --git a/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml new file mode 100644 index 0000000000000..3b592c820eb4c --- /dev/null +++ b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape PCIe controller + +maintainers: + - Frank Li <Frank.Li@xxxxxxx> + +description: |+ + This PCIe endpoint controller is based on the Synopsys DesignWare PCIe IP + and thus inherits all the common properties defined in snps,dw-pcie-ep.yaml. + + This controller derives its clocks from the Reset Configuration Word (RCW) + which is used to describe the PLL settings at the time of chip-reset. + + Also as per the available Reference Manuals, there is no specific 'version' + register available in the Freescale PCIe controller register set, + which can allow determining the underlying DesignWare PCIe controller version + information. + +properties: + compatible: + enum: + - fsl,ls2088a-pcie-ep + - fsl,ls1088a-pcie-ep + - fsl,ls1046a-pcie-ep + - fsl,ls1028a-pcie-ep + - fsl,lx2160ar2-pcie-ep + + reg: + maxItems: 2 + + reg-names: + items: + - const: regs + - const: addr_space + + fsl,pcie-scfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the SCFG device node. The second entry is the + physical PCIe controller index starting from '0'. This is used to get + SCFG PEXN registers. + + dma-coherent: + $ref: /schemas/types.yaml#/definitions/flag + description: Indicates that the hardware IP block can ensure the coherency + of the data transferred from/to the IP block. This can avoid the software + cache flush/invalid actions, and improve the performance significantly. + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: If the PEX_LUT and PF register block is in big-endian, specify + this property. + +required: + - compatible + - reg + - reg-names + - "#address-cells" + - "#size-cells" + - device_type + - bus-range + - ranges + +allOf: + - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# + + - if: + properties: + compatible: + enum: + - fsl,ls1028a-pcie-ep + - fsl,ls1046a-pcie-ep + - fsl,ls1088a-pcie-ep + then: + properties: + interrupt-names: + items: + - const: pme + +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml new file mode 100644 index 0000000000000..e3719da306f25 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape PCIe controller + +maintainers: + - Frank Li <Frank.Li@xxxxxxx> + +description: |+ + This PCIe host controller is based on the Synopsys DesignWare PCIe IP + and thus inherits all the common properties defined in snps,dw-pcie.yaml. + + This controller derives its clocks from the Reset Configuration Word (RCW) + which is used to describe the PLL settings at the time of chip-reset. + + Also as per the available Reference Manuals, there is no specific 'version' + register available in the Freescale PCIe controller register set, + which can allow determining the underlying DesignWare PCIe controller version + information. + +properties: + compatible: + enum: + - fsl,ls1021a-pcie + - fsl,ls2080a-pcie + - fsl,ls2085a-pcie + - fsl,ls2088a-pcie + - fsl,ls1088a-pcie + - fsl,ls1046a-pcie + - fsl,ls1043a-pcie + - fsl,ls1012a-pcie + - fsl,ls1028a-pcie + + reg: + maxItems: 2 + + reg-names: + items: + - const: regs + - const: config + + fsl,pcie-scfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the SCFG device node. The second entry is the + physical PCIe controller index starting from '0'. This is used to get + SCFG PEXN registers. + + dma-coherent: + $ref: /schemas/types.yaml#/definitions/flag + description: Indicates that the hardware IP block can ensure the coherency + of the data transferred from/to the IP block. This can avoid the software + cache flush/invalid actions, and improve the performance significantly. + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: If the PEX_LUT and PF register block is in big-endian, specify + this property. + + msi-parent: true + + iommu-map: true + +required: + - compatible + - reg + - reg-names + - "#address-cells" + - "#size-cells" + - device_type + - bus-range + - ranges + - interrupts + - interrupt-names + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + + - if: + properties: + compatible: + enum: + - fsl,ls1028a-pcie + - fsl,ls1046a-pcie + - fsl,ls1043a-pcie + - fsl,ls1012a-pcie + then: + properties: + interrupts: + maxItems: 2 + interrupt-names: + items: + - const: pme + - const: aer + + - if: + properties: + compatible: + enum: + - fsl,ls2080a-pcie + - fsl,ls2085a-pcie + - fsl,ls2088a-pcie + then: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: intr + + - if: + properties: + compatible: + enum: + - fsl,ls1088a-pcie + then: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: aer + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@3400000 { + compatible = "fsl,ls1088a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + dma-coherent; + device_type = "pci"; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt deleted file mode 100644 index ee8a4791a78b4..0000000000000 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ /dev/null @@ -1,79 +0,0 @@ -Freescale Layerscape PCIe controller - -This PCIe host controller is based on the Synopsys DesignWare PCIe IP -and thus inherits all the common properties defined in snps,dw-pcie.yaml. - -This controller derives its clocks from the Reset Configuration Word (RCW) -which is used to describe the PLL settings at the time of chip-reset. - -Also as per the available Reference Manuals, there is no specific 'version' -register available in the Freescale PCIe controller register set, -which can allow determining the underlying DesignWare PCIe controller version -information. - -Required properties: -- compatible: should contain the platform identifier such as: - RC mode: - "fsl,ls1021a-pcie" - "fsl,ls2080a-pcie", "fsl,ls2085a-pcie" - "fsl,ls2088a-pcie" - "fsl,ls1088a-pcie" - "fsl,ls1046a-pcie" - "fsl,ls1043a-pcie" - "fsl,ls1012a-pcie" - "fsl,ls1028a-pcie" - EP mode: - "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep" - "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" - "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep" - "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep" - "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep" -- reg: base addresses and lengths of the PCIe controller register blocks. -- interrupts: A list of interrupt outputs of the controller. Must contain an - entry for each entry in the interrupt-names property. -- interrupt-names: It could include the following entries: - "aer": Used for interrupt line which reports AER events when - non MSI/MSI-X/INTx mode is used - "pme": Used for interrupt line which reports PME events when - non MSI/MSI-X/INTx mode is used - "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a) - which has a single interrupt line for miscellaneous controller - events(could include AER and PME events). -- fsl,pcie-scfg: Must include two entries. - The first entry must be a link to the SCFG device node - The second entry is the physical PCIe controller index starting from '0'. - This is used to get SCFG PEXN registers -- dma-coherent: Indicates that the hardware IP block can ensure the coherency - of the data transferred from/to the IP block. This can avoid the software - cache flush/invalid actions, and improve the performance significantly. - -Optional properties: -- big-endian: If the PEX_LUT and PF register block is in big-endian, specify - this property. - -Example: - - pcie@3400000 { - compatible = "fsl,ls1088a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ - <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ - interrupt-names = "aer"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-viewport = <256>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; - iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ - }; -- 2.34.1
