Re: [PATCH v3 6/6] riscv: dts: starfive: add Milkv Mars board device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 31, 2024 at 09:26:00PM +0800, Jisheng Zhang wrote:
> The Milkv Mars is a development board based on the Starfive JH7110 SoC.
> The board features:
> 
> - JH7110 SoC
> - 1/2/4/8 GiB LPDDR4 DRAM
> - AXP15060 PMIC
> - 40 pin GPIO header
> - 3x USB 3.0 host port
> - 1x USB 2.0 host port
> - 1x M.2 E-Key
> - 1x eMMC slot
> - 1x MicroSD slot
> - 1x QSPI Flash
> - 1x 1Gbps Ethernet port
> - 1x HDMI port
> - 1x 2-lane DSI and 1x 4-lane DSI
> - 1x 2-lane CSI
> 
> Add the devicetree file describing the currently supported features,
> namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet.
> 
> Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxx>

Got a dtbs_check issue in the patchwork CI:

  +arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dtb: gmac1-rgmii-rxin-clock: 'clock-frequency' is a required property
  +	from schema $id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
  +arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dtb: gmac1-rmii-refin-clock: 'clock-frequency' is a required property
  +	from schema $id: http://devicetree.org/schemas/clock/fixed-clock.yaml#

Can you fix that please? Also, I applied some patches the other day that
seem to conflict quite a bit with the common board dts patch. Would you
please do a rebase on top of that please?

Cheers,
Conor.

> ---
>  arch/riscv/boot/dts/starfive/Makefile         |  1 +
>  .../boot/dts/starfive/jh7110-milkv-mars.dts   | 35 +++++++++++++++++++
>  2 files changed, 36 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
> 
> diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
> index 0141504c0f5c..2fa0cd7f31c3 100644
> --- a/arch/riscv/boot/dts/starfive/Makefile
> +++ b/arch/riscv/boot/dts/starfive/Makefile
> @@ -8,5 +8,6 @@ DTC_FLAGS_jh7110-starfive-visionfive-2-v1.3b := -@
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
>  
> +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
> new file mode 100644
> index 000000000000..de600e799e7d
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2023 Jisheng Zhang <jszhang@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +#include "jh7110-visionfive2-mars-common.dtsi"
> +
> +/ {
> +	model = "Milk-V Mars";
> +	compatible = "milkv,mars", "starfive,jh7110";
> +};
> +
> +&gmac0 {
> +	starfive,tx-use-rgmii-clk;
> +	assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
> +	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
> +};
> +
> +
> +&phy0 {
> +	motorcomm,tx-clk-adj-enabled;
> +	motorcomm,tx-clk-10-inverted;
> +	motorcomm,tx-clk-100-inverted;
> +	motorcomm,tx-clk-1000-inverted;
> +	motorcomm,rx-clk-drv-microamp = <3970>;
> +	motorcomm,rx-data-drv-microamp = <2910>;
> +	rx-internal-delay-ps = <1500>;
> +	tx-internal-delay-ps = <1500>;
> +};
> +
> +&mmc1 {
> +	disable-wp;
> +	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
> +};
> -- 
> 2.43.0
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux