Hi On Tue, 27 Jan 2015, Felipe Balbi wrote: > On Mon, Jan 26, 2015 at 01:49:33PM -0600, Felipe Balbi wrote: > > On Mon, Jan 26, 2015 at 10:56:40AM -0600, Felipe Balbi wrote: > > > > > hm... modulemode SWCTRL causes wait_target_ready to fail. Any hints ? > > > > gets stuck in transition state. PRCM_CM_WKUP_DBGSS_CLKCTRL is always > > read as 0x 12510f00 which would translate into: > > > > - module disabled > > - all opt clocks are on > > - module is transitioning > > - module in standby > > - clkA as TPIU and STM trace clock > > - all dividers set to 2 > > just fyi, checking with HW folks, this might be a new bug, unless > debugss needs something special. If that happens on DEBUGSS disable, it's probably the same issue as on AM33xx: http://www.spinics.net/lists/arm-kernel/msg320801.html http://www.spinics.net/lists/arm-kernel/msg321930.html http://www.spinics.net/lists/arm-kernel/msg329151.html Does adding HWMOD_INIT_NO_IDLE fix the issue you're seeing? - Paul -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
