Dne nedelja, 04. februar 2024 ob 10:32:55 CET je Andre Przywara napisal(a):
> In contrast to other devices using Allwinner SoCs, the Transpeed 8K618-T
> TV box uses a mainline supported WiFi chip: it's a Broadcom 4335
> compatible, packaged by a company called Murata.
> It works nicely with the Linux driver, when providing the respective
> firmware files.
>
> Add the required DT nodes to let the kernel find the SDIO device.
Can you reword message in a way to omit Linux?
>
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> ---
> .../sun50i-h618-transpeed-8k618-t.dts | 23 +++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
> index 8ea1fd41aeba..7ec4098e707b 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
> @@ -16,6 +16,7 @@ / {
>
> aliases {
> serial0 = &uart0;
> + ethernet1 = &sdio_wifi;
> };
>
> chosen {
> @@ -39,6 +40,15 @@ reg_vcc3v3: vcc3v3 {
> regulator-max-microvolt = <3300000>;
> regulator-always-on;
> };
> +
> + wifi_pwrseq: wifi_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rtc CLK_OSC32K_FANOUT>;
> + clock-names = "ext_clock";
> + pinctrl-0 = <&x32clk_fanout_pin>;
> + pinctrl-names = "default";
> + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
> + };
> };
>
> &ehci0 {
> @@ -60,6 +70,19 @@ &mmc0 {
> status = "okay";
> };
>
> +&mmc1 {
> + vmmc-supply = <®_dldo1>;
> + vqmmc-supply = <®_aldo1>;
> + mmc-pwrseq = <&wifi_pwrseq>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +
> + sdio_wifi: wifi@1 {
> + reg = <1>;
> + };
I don't think this node and alias are useful in any way. SDIO scan will find
device regardless and potential mac property set up by bootloader will be
ignored anyway.
Best regards,
Jernej
> +};
> +
> &mmc2 {
> vmmc-supply = <®_dldo1>;
> vqmmc-supply = <®_aldo1>;
>
