The Allwinner A64 manual lists the following constraints for the
PLL-MIPI clock:
- M/N <= 3
- (PLL_VIDEO0)/M >= 24MHz
Use these constraints.
Signed-off-by: Frank Oltmanns <frank@xxxxxxxxxxxx>
---
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 8951ffc14ff5..df679dada792 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -171,11 +171,13 @@ static struct ccu_nkm pll_mipi_clk = {
* user manual, and by experiments the PLL doesn't work without
* these bits toggled.
*/
- .enable = BIT(31) | BIT(23) | BIT(22),
- .lock = BIT(28),
- .n = _SUNXI_CCU_MULT(8, 4),
- .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
- .m = _SUNXI_CCU_DIV(0, 4),
+ .enable = BIT(31) | BIT(23) | BIT(22),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT(8, 4),
+ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
+ .m = _SUNXI_CCU_DIV(0, 4),
+ .max_m_n_ratio = 3,
+ .min_parent_m_ratio = 24000000,
.common = {
.reg = 0x040,
.hw.init = CLK_HW_INIT("pll-mipi", "pll-video0",
--
2.43.0
