Split keyboard and touchpad pinctrl nodes since they are for different
devices and move keyboard, touchpad and touchscreen pinctrl references to
appropriate nodes.
Signed-off-by: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
---
.../boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 41 +++++++++++++------
1 file changed, 29 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index af61acf58d68..6ae6cb030b70 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -357,7 +357,7 @@ zap-shader {
&i2c1 {
clock-frequency = <100000>;
- pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>;
+ pinctrl-0 = <&i2c1_active>;
pinctrl-names = "default";
status = "okay";
@@ -368,13 +368,16 @@ touchscreen@10 {
hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&ts_int_default>;
+ pinctrl-names = "default";
};
};
&i2c7 {
clock-frequency = <100000>;
- pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>;
+ pinctrl-0 = <&i2c7_active>;
pinctrl-names = "default";
status = "okay";
@@ -385,6 +388,9 @@ keyboard@5 {
hid-descr-addr = <0x20>;
interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&kb_int_default>;
+ pinctrl-names = "default";
};
touchpad@2c {
@@ -393,6 +399,9 @@ touchpad@2c {
hid-descr-addr = <0x20>;
interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&tp_int_default>;
+ pinctrl-names = "default";
};
};
@@ -669,14 +678,6 @@ i2c1_active: i2c1-active-state {
drive-strength = <2>;
};
- i2c1_hid_active: i2c1-hid-active-state {
- pins = "gpio122";
- function = "gpio";
-
- bias-pull-up;
- drive-strength = <2>;
- };
-
i2c7_active: i2c7-active-state {
pins = "gpio98", "gpio99";
function = "qup7";
@@ -685,8 +686,8 @@ i2c7_active: i2c7-active-state {
drive-strength = <2>;
};
- i2c7_hid_active: i2c7-hid-active-state {
- pins = "gpio37", "gpio24";
+ kb_int_default: kb-int-default-state {
+ pins = "gpio37";
function = "gpio";
bias-pull-up;
@@ -718,6 +719,22 @@ wake-n-pins {
};
};
+ tp_int_default: tp-int-default-state {
+ pins = "gpio24";
+ function = "gpio";
+
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ ts_int_default: ts-int-default-state {
+ pins = "gpio122";
+ function = "gpio";
+
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
usbprim_sbu_default: usbprim-sbu-state {
oe-n-pins {
pins = "gpio152";
--
2.42.0
