Re: [PATCH v3 00/17] kexec: Allow preservation of ftrace buffers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Philipp,

On 29.01.24 17:34, Philipp Rudo wrote:
Hi Alex,

adding linux-integrity as there are some synergies with IMA_KEXEC (in case we
get KHO to work).

Fist of all I believe that having a generic framework to pass information from
one kernel to the other across kexec would be a good thing. But I'm afraid that


Thanks, I'm happy to hear that you agree with the basic motivation :). There are fundamentally 2 problems with passing data:

  * Passing structured data in a cross-architecture way
  * Passing memory

KHO tackles both. It proposes a common FDT based format that allows us to pass per-subsystem properties. That way, a subsystem does not need to know whether it's running on ARM, x86, RISC-V or s390x. It just gains awareness for KHO and can pass data.

On top of that, it proposes a standardized "mem" property (and some magic around that) which allows subsystems to pass memory.


you are ignoring some fundamental problems which makes it extremely hard, if
not impossible, to reliably transfer the kernel's state from one kernel to the
other.

One thing I don't understand is how reusing the scratch area is working. Sure
you pass it's location via the dt/boot_params but I don't see any code that
makes it a CMA region. So IIUC the scratch area won't be available for the 2nd
kernel. Which is probably for the better as IIUC the 2nd kernel gets loaded and
runs inside that area and I don't believe the CMA design ever considered that
the kernel image could be included in a CMA area.


That one took me a lot to figure out sensibly (with recursion all the way down) while building KHO :). I hope I detailed it sensibly in the documentation - please let me know how to improve it in case it's unclear: https://lore.kernel.org/lkml/20240117144704.602-8-graf@xxxxxxxxxx/

Let me explain inline using different words as well what happens:

The first (and only the first) kernel that boots allocates a CMA region as "scratch region". It loads the new kernel into that region. It passes that region as "scratch region" to the next kernel. The next kernel now takes it and marks every page block that the scratch region spans as CMA:

https://lore.kernel.org/lkml/20240117144704.602-3-graf@xxxxxxxxxx/

The CMA hint doesn't mean we create an actual CMA region. It mostly means that the kernel won't use this memory for any kernel allocations. Kernel allocations up to this point are allocations we don't need to pass on with KHO again. Kernel allocations past that point may be allocations that we want to pass, so we just never place them into the "scratch region" again.

And because we now already have a scratch region from the previous kernel, we keep reusing that forever with any new KHO kexec.


Staying at reusing the scratch area. One thing that is broken for sure is that
you reuse the scratch area without ever checking the kho_scratch parameter of
the 2nd kernel's command line. Remember, with kexec you are dealing with two
different kernels with two different command lines. Meaning you can only reuse
the scratch area if the requested size in the 2nd kernel is identical to the
one of the 1st kernel. In all other cases you need to adjust the scratch area's
size or reserve a new one.


Hm. So you're saying a user may want to change the size of the scratch area with a KHO kexec. That's insanely risky because you (as rightfully pointed out below) may have significant fragmentation at that point. And we will only know when we're in the new kernel so it's too late to abort. IMHO it's better to just declare the scratch region as immutable during KHO to avoid that pitfall.


This directly leads to the next problem. In kho_reserve_previous_mem you are
reusing the different memory regions wherever the 1st kernel allocated them.
But that also means you are handing over the 1st kernel's memory
fragmentation to the 2nd kernel and you do that extremely early during boot.
Which means that users who need to allocate large continuous physical memory,
like the scratch area or the crashkernel memory, will have increasing chance to
not find a suitable area. Which IMHO is unacceptable.


Correct :). It basically means you want to pass large allocations from the 1st kernel that you want to preserve on to the next. So if the 1st kernel allocated a large crash area, it's safest to pass that allocation using KHO to ensure the next kernel also has the region fully reserved. Otherwise the next kernel may accidentally place data into the previously reserved crash region (which would be contiguously free at early init of the 2nd kernel) and fragment it again.


Finally, and that's the big elephant in the room, is your lax handling of the
unstable kernel internal ABI. Remember, you are dealing with two different
kernels, that also means two different source levels and two different configs.
So only because both the 1st and 2nd kernel have a e.g. struct buffer_page
doesn't means that they have the same struct buffer_page. But that's what your
code implicitly assumes. For KHO ever to make it upstream you need to make sure
that both kernels are "speaking the same language".


Wow, I hope it didn't come across as that! The whole point of using FDT and compatible strings in KHO is to solve exactly that problem. Any time a passed over data structure changes incompatibly, you would need to modify the compatible string of the subsystem that owns the now incompatible data.

So in the example of struct buffer_page, it means that if anyone changes the few bits we care about in struct buffer_page, we need to ensure that the new kernel emits "ftrace,cpu-v2" compatible strings. We can at that point choose whether we want to implement compat handling for "ftrace,cpu-v1" style struct buffer_pages or only support same version ingestion.

The one thing that we could improve on here today IMHO is to have compile time errors if any part of struct buffer_page changes semantically: So we'd create a few defines for the bits we want in "ftrace,cpu-v1" as well as size of struct buffer_page and then compare them to what the struct offsets are at compile time to ensure they stay identical.

Please let me know how I can clarify that more in the documentation. It really is the absolute core of KHO.


Personally I see two possible solutions:

1) You introduce a stable intermediate format for every subsystem similar to
what IMA_KEXEC does. This should work for simple types like struct buffer_page
but for complex ones like struct vfio_device that's basically impossible.


I don't see why. The only reason KHO passes struct buffer_page as memory is because we want to be able to produce traces even after KHO serialization is done. For vfio_device, I think it's perfectly reasonable to serialize any data we need to preserve directly into FDT properties.


2) You also hand over the ABI version for every given type (basically just a
hash over all fields including all the dependencies). So the 2nd kernel can
verify that the data handed over is in a format it can handle and if not bail
out with a descriptive error message rather than reading garbage. Plus side is
that once such a system is in place you can reuse it to automatically resolve
all dependencies so you no longer need to manually store the buffer_page and
its buffer_data_page separately.
Down side is that traversing the debuginfo (including the ones from modules) is
not a simple task and I expect that such a system will be way more complex than
the rest of KHO. In addition there are some cases that the versioning won't be
able to capture. For example if a type contains a "void *"-field. Then although
the definition of the type is identical in both kernels the field can be cast
to different types when used. An other problem will be function pointers which
you first need to resolve in the 1st kernel and then map to the identical
function in the 2nd kernel. This will become particularly "fun" when the
function is part of a module that isn't loaded at the time when you try to
recreate the kernel's state.


The whole point of KHO is to leave it to the subsystem which path they want to take. The subsystem can either pass binary data and validate as part of FDT properties (like compatible strings). That data can be identical to today's in-kernel data structures (usually a bad idea) or can be a new intermediate data format. But the subsystem can also choose to fully serialize into FDT properties and not pass any memory at all for state that would be in structs. Or something in between.


So to summarize, while it would be nice to have a generic framework like KHO to
pass data from one kernel to the other via kexec there are good reasons why it
doesn't exist, yet.


I hope my explanations above clarify things a bit. Let me know if you're at FOSDEM, happy to talk about the internals there as well :)


Alex





Amazon Development Center Germany GmbH
Krausenstr. 38
10117 Berlin
Geschaeftsfuehrung: Christian Schlaeger, Jonathan Weiss
Eingetragen am Amtsgericht Charlottenburg unter HRB 149173 B
Sitz: Berlin
Ust-ID: DE 289 237 879






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux