Re: [EXT] Re: [PATCH v5 4/8] dt-bindings: usb: ci-hdrc-usb2: add restrictions for reg, interrupts, clock and clock-names properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/02/2024 10:10, Xu Yang wrote:
> Hi Krzysztof,
> 
>>
>> On 31/01/2024 12:43, Xu Yang wrote:
>>> Change reg, interrupts, clock and clock-names as common properties and add
>>> restrictions on them for different compatibles.
>>>
>>> Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
>>>
>>> ---
>>> Changes in v4:
>>>  - new patch since v3's discussion
>>>  - split the reg, interrupts, clock and clock-names properties into
>>>    common part and device-specific
>>> Changes in v5:
>>>  - keep common property unchanged
>>>  - make if-then more readable
>>>  - remove non imx part
>>> ---
>>>  .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 118 ++++++++++++++++++
>>>  1 file changed, 118 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-
>> hdrc-usb2.yaml
>>> index 3b56e0edb1c6..6ad3582051b8 100644
>>> --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
>>> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
>>> @@ -412,6 +412,124 @@ allOf:
>>>          samsung,picophy-pre-emp-curr-control: false
>>>          samsung,picophy-dc-vol-level-adjust: false
>>>
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          const: fsl,imx27-usb
>>> +    then:
>>> +      properties:
>>> +        clocks:
>>> +          minItems: 3
>>> +          maxItems: 3
>>> +        clock-names:
>>> +          minItems: 3
>>> +          maxItems: 3
>>> +          items:
>>> +            anyOf:
>>> +              - const: ipg
>>> +              - const: ahb
>>> +              - const: per
>>
>> This would be just: enum: [ipg, ahb, per], but in both cases I question
>> why the order should be flexible? Nothing in commit msg explains it.
> 
> The driver will get the clock by clock-name, then the order should not
> matter. However, these three clock-names should be present at the same
> time. I should use enum then.

Forgot to answer to this.

Which driver? U-boot? OpenBSD? The one in my custom Linux kernel fork
(open-source and published on github)? Did you check all of them?

The order should be strict (or "fixed" as in non-flexible), unless there
is some reason against. If one driver does not care about order, is not
the reason.

This comment applies to all bindings so to all your future
contributions. I really keep repeating it...


Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux