On 30.01.2024 21:27, Anton Bambura wrote:
> Set regulators, reset gpio and delays according to ACPI tables.
>
> Signed-off-by: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
> ---
> .../boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 32 +++++++++++++++++--
> 1 file changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
> index af61acf58d68..8e8e1fca11c0 100644
> --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
> @@ -271,6 +271,12 @@ vreg_l3c_1p2: ldo3 {
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> };
>
> + vreg_l4c_3p3: ldo4 {
> + regulator-min-microvolt = <3296000>;
> + regulator-max-microvolt = <3304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> vreg_l10c_3p3: ldo10 {
> regulator-min-microvolt = <3000000>;
> regulator-max-microvolt = <3312000>;
> @@ -337,6 +343,12 @@ vreg_l10e_2p9: ldo10 {
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> };
>
> + vreg_l12e_1p8: ldo12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> vreg_l16e_3p0: ldo16 {
> regulator-min-microvolt = <3072000>;
> regulator-max-microvolt = <3072000>;
> @@ -357,7 +369,7 @@ zap-shader {
> &i2c1 {
> clock-frequency = <100000>;
>
> - pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>;
> + pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>, <&ts_reset>;
I think you want to add a reference under the touchscreen node instead.
Konrad
