When a command is received, it is sometime needed to let the CLF driver do
some additional operations. (ex: count remaining pipe notification...)
Make also generic HCI commands available to other NFC drivers
Signed-off-by: Christophe Ricard <christophe-h.ricard@xxxxxx>
---
include/net/nfc/hci.h | 8 ++++++++
net/nfc/hci/core.c | 3 +++
2 files changed, 11 insertions(+)
diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h
index 1d1fd2b..ab672b5 100644
--- a/include/net/nfc/hci.h
+++ b/include/net/nfc/hci.h
@@ -53,6 +53,8 @@ struct nfc_hci_ops {
struct nfc_target *target);
int (*event_received)(struct nfc_hci_dev *hdev, u8 pipe, u8 event,
struct sk_buff *skb);
+ void (*cmd_received)(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd,
+ struct sk_buff *skb);
int (*fw_download)(struct nfc_hci_dev *hdev, const char *firmware_name);
int (*discover_se)(struct nfc_hci_dev *dev);
int (*enable_se)(struct nfc_hci_dev *dev, u32 se_idx);
@@ -230,6 +232,12 @@ void nfc_hci_reset_pipes_per_host(struct nfc_hci_dev *hdev, u8 host);
#define NFC_HCI_EVT_POST_DATA 0x02
#define NFC_HCI_EVT_HOT_PLUG 0x03
+/* Generic commands */
+#define NFC_HCI_ANY_SET_PARAMETER 0x01
+#define NFC_HCI_ANY_GET_PARAMETER 0x02
+#define NFC_HCI_ANY_OPEN_PIPE 0x03
+#define NFC_HCI_ANY_CLOSE_PIPE 0x04
+
/* Reader RF gates events */
#define NFC_HCI_EVT_READER_REQUESTED 0x10
#define NFC_HCI_EVT_END_OPERATION 0x11
diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c
index a664a67..6e061da 100644
--- a/net/nfc/hci/core.c
+++ b/net/nfc/hci/core.c
@@ -249,6 +249,9 @@ void nfc_hci_cmd_received(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd,
break;
}
+ if (hdev->ops->cmd_received)
+ hdev->ops->cmd_received(hdev, pipe, cmd, skb);
+
exit:
nfc_hci_hcp_message_tx(hdev, pipe, NFC_HCI_HCP_RESPONSE,
status, NULL, 0, NULL, NULL, 0);
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
