[RFC 7/9] PCI: hold the rescan mutex when scanning for the first time

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

With the introduction of the power sequencing drivers that will be able
to trigger the port rescan, we need to hold the rescan mutex during the
initial pci_host_probe() too or the two could get in each other's way.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
 drivers/pci/probe.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index b7335be56008..957f7afee7ba 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -3122,7 +3122,9 @@ int pci_host_probe(struct pci_host_bridge *bridge)
 	struct pci_bus *bus, *child;
 	int ret;
 
+	pci_lock_rescan_remove();
 	ret = pci_scan_root_bus_bridge(bridge);
+	pci_unlock_rescan_remove();
 	if (ret < 0) {
 		dev_err(bridge->dev.parent, "Scanning root bridge failed");
 		return ret;
-- 
2.40.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux