Hello, On Thu Feb 1, 2024 at 10:13 AM CET, Krzysztof Kozlowski wrote: > On 31/01/2024 17:26, Théo Lebrun wrote: > > UART nodes have been added to the devicetree by the initial platform > > support patch series. Add reset properties now that the reset node is > > declared. > > > > Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx> > > --- > > arch/mips/boot/dts/mobileye/eyeq5.dtsi | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi > > index 06e941b0ce10..ece71cafb6ee 100644 > > --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi > > +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi > > @@ -78,6 +78,7 @@ uart0: serial@800000 { > > interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>; > > clocks = <&uart_clk>, <&occ_periph>; > > clock-names = "uartclk", "apb_pclk"; > > + resets = <&reset 0 10>; > > You touch the same file. Squash the patch with previous one. It's the > same logical change to add reset to entire SoC. You don't add half of > reset, right? Makes sense. I'll update the commit message with that change. Thanks, -- Théo Lebrun, Bootlin Embedded Linux and Kernel engineering https://bootlin.com