Re: [PATCH v8 1/3] dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM controller

[Maxim Kiselev <bigunclemax@xxxxxxxxx>]

Hi Aleksandr,

ср, 31 янв. 2024 г. в 15:59, Aleksandr Shubin <privatesub2@xxxxxxxxx>:
>
> Allwinner's D1, T113-S3 and R329 SoCs have a new pwm
> controller witch is different from the previous pwm-sun4i.
>
> The D1 and T113 are identical in terms of peripherals,
> they differ only in the architecture of the CPU core, and
> even share the majority of their DT. Because of that,
> using the same compatible makes sense.
> The R329 is a different SoC though, and should have
> a different compatible string added, especially as there
> is a difference in the number of channels.
>
> D1 and T113s SoCs have one PWM controller with 8 channels.
> R329 SoC has two PWM controllers in both power domains, one of
> them has 9 channels (CPUX one) and the other has 6 (CPUS one).
>
> Add a device tree binding for them.
>
> Signed-off-by: Aleksandr Shubin <privatesub2@xxxxxxxxx>
> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
> .../bindings/pwm/allwinner,sun20i-pwm.yaml | 88 +++++++++++++++++++
> 1 file changed, 88 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
>
> diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
> new file mode 100644
> index 000000000000..716f75776006
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/allwinner,sun20i-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner D1, T113-S3 and R329 PWM
> +
> +maintainers:
> + - Aleksandr Shubin <privatesub2@xxxxxxxxx>
> + - Brandon Cheo Fusi <fusibrandon13@xxxxxxxxx>
> +
> +properties:
> + compatible:
> + oneOf:
> + - const: allwinner,sun20i-d1-pwm
> + - items:
> + - const: allwinner,sun20i-r329-pwm

According to the bsp sdk and other mainline drivers for
R329 SoC, the sun50i prefix should be used instead the sun20i

> + - const: allwinner,sun20i-d1-pwm
> +
> + reg:
> + maxItems: 1
> +
> + "#pwm-cells":
> + const: 3
> +
> + clocks:
> + items:
> + - description: Bus clock
> + - description: 24 MHz oscillator
> + - description: APB0 clock
> +
> + clock-names:
> + items:
> + - const: bus
> + - const: hosc
> + - const: apb0
> +
> + resets:
> + maxItems: 1
> +
> + allwinner,pwm-channels:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: The number of PWM channels configured for this instance
> + enum: [6, 9]
> +
> +allOf:
> + - $ref: pwm.yaml#
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: allwinner,sun20i-r329-pwm

Same here.

> + then:
> + required:
> + - allwinner,pwm-channels
> +
> + else:
> + properties:
> + allwinner,pwm-channels: false
> +
> +unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - "#pwm-cells"
> + - clocks
> + - clock-names
> + - resets
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/sun20i-d1-ccu.h>
> + #include <dt-bindings/reset/sun20i-d1-ccu.h>
> +
> + pwm: pwm@2000c00 {
> + compatible = "allwinner,sun20i-d1-pwm";
> + reg = <0x02000c00 0x400>;
> + clocks = <&ccu CLK_BUS_PWM>, <&dcxo>, <&ccu CLK_APB0>;
> + clock-names = "bus", "hosc", "apb0";
> + resets = <&ccu RST_BUS_PWM>;
> + #pwm-cells = <0x3>;
> + };
> +
> +...
> --
> 2.25.1
>

Best regards,
Maksim