Re: [RFC PATCH 00/13] Add tuning algorithm for delay chain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 1/31/2024 6:07 AM, Judith Mendez wrote:
> This patch series introduces a new tuning algorithm for
> mmc. The new algorithm should be used when delay chain is
> enabled. The ITAPDLY is selected from the largest passing
> window and the buffer is not viewed as a circular buffer.
> The new tuning algorithm is implemented as per the paper
> published here [0] and has been tested on the following
> platforms: AM62x SK, AM62A SK, AM62p SK, AM64x SK, and AM64x
> EVM.
> 
> The series also includes a few fixes in the sdhci_am654
> driver on OTAPDLYEN/ITAPDLYEN and ITAPDELSEL. There are
> also device tree node fixes for missing mmc nodes,
> modifying DLL properties, and fixes for OTAP/ITAP delay
> values. 
> 
> MMC0/MMC2 nodes are introduced for AM62ax in this series.
> 
> This series is sent as a RFC mostly to get some feedback
> and/or comments on the new tuning algorithm implementation.
> 
> [0] https://www.ti.com/lit/an/spract9/spract9.pdf
> 


> Judith Mendez (11):
>   drivers: mmc: host: sdhci_am654: Add tuning algorithm for delay chain
>   drivers: mmc: host: sdhci_am654: Write ITAPDLY for DDR52 timing
>   drivers: mmc: host: sdhci_am654: Add missing OTAP/ITAP enable
>   drivers: mmc: host: sdhci_am654: Add ITAPDLYSEL in
>     sdhci_j721e_4bit_set_clock
>   drivers: mmc: host: sdhci_am654: Fix ITAPDLY for HS400 timing

These patches needs to have Fixes: tag as they are bug fixes IMO.

>   arm64: dts: ti: k3-am62a-main: Add sdhci2 instance
>   arm64: dts: ti: k3-am64-main: Update ITAP/OTAP values for MMC
>   arm64: dts: ti: k3-am62-main: Update ITAP/OTAP values for MMC
>   arm64: dts: ti: k3-am62p: Add missing properties for MMC
>   arm64: dts: ti: k3-am6*: Remove DLL properties for soft phys
>   arm64: dts: ti: k3-am6*: Reorganize MMC properties
> 
> Nitin Yadav (2):
>   arm64: dts: ti: k3-am62a-main: Add sdhci0 instance
>   arm64: dts: ti: k3-am62a7-sk: Enable eMMC support
> 

Can the driver changes be merged independent of DT changes? Or are they
meant to go together? Latter would be problematic as it creates cross
tree dependencies.

>  arch/arm64/boot/dts/ti/k3-am62-main.dtsi      |  57 +++--
>  .../arm64/boot/dts/ti/k3-am625-beagleplay.dts |   5 -
>  arch/arm64/boot/dts/ti/k3-am62a-main.dtsi     |  45 +++-
>  arch/arm64/boot/dts/ti/k3-am62a7-sk.dts       |  27 ++-
>  arch/arm64/boot/dts/ti/k3-am62p-main.dtsi     |  44 +++-
>  arch/arm64/boot/dts/ti/k3-am62p5-sk.dts       |   7 +-
>  .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi |   4 +-
>  arch/arm64/boot/dts/ti/k3-am64-main.dtsi      |  17 +-
>  arch/arm64/boot/dts/ti/k3-am642-evm.dts       |   4 +-
>  arch/arm64/boot/dts/ti/k3-am642-sk.dts        |   2 -
>  drivers/mmc/host/sdhci_am654.c                | 215 ++++++++++++++----
>  11 files changed, 321 insertions(+), 106 deletions(-)
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux