Re: [PATCH v6 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 31/01/2024 10:50, Krzysztof Kozlowski wrote:
> On 31/01/2024 09:57, Linus Walleij wrote:
>> Hi Krzysztof,
>>
>> something is odd with the addresses on this patch, because neither GPIO
> 
> Nothing is odd - I use get_maintainers.pl which just don't print your
> names. I can add your addresses manually, no problem, but don't blame
> the contributor that get_maintainers.pl has a missing content-regex. If
> you want to be Cced on usage of GPIOs, you need to be sure that
> MAINTAINERS file has appropriate pattern.
> 
> 
>> maintainer is on CC nor linux-gpio@vger, and it's such a GPIO-related
>> patch. We only saw it through side effects making <linux/gpio/driver.h>
>> optional, as required by this patch.
>>
>> Please also CC Geert Uytterhoeven, the author of the GPIO aggregator.
> 
> 
>>
>> i.e. this:
>>> 2. !GPIOLIB stub:
>>>    https://lore.kernel.org/all/20240125081601.118051-3-krzysztof.kozlowski@xxxxxxxxxx/
>>
>> On Mon, Jan 29, 2024 at 12:53 PM Krzysztof Kozlowski
>> <krzysztof.kozlowski@xxxxxxxxxx> wrote:
>>
>>> Devices sharing a reset GPIO could use the reset framework for
>>> coordinated handling of that shared GPIO line.  We have several cases of
>>> such needs, at least for Devicetree-based platforms.
>>>
>>> If Devicetree-based device requests a reset line, while "resets"
>>> Devicetree property is missing but there is a "reset-gpios" one,
>>> instantiate a new "reset-gpio" platform device which will handle such
>>> reset line.  This allows seamless handling of such shared reset-gpios
>>> without need of changing Devicetree binding [1].
>>>
>>> To avoid creating multiple "reset-gpio" platform devices, store the
>>> Devicetree "reset-gpios" GPIO specifiers used for new devices on a
>>> linked list.  Later such Devicetree GPIO specifier (phandle to GPIO
>>> controller, GPIO number and GPIO flags) is used to check if reset
>>> controller for given GPIO was already registered.
>>>
>>> If two devices have conflicting "reset-gpios" property, e.g. with
>>> different ACTIVE_xxx flags, this would allow to spawn two separate
>>> "reset-gpio" devices, where the second would fail probing on busy GPIO
>>> request.
>>>
>>> Link: https://lore.kernel.org/all/YXi5CUCEi7YmNxXM@xxxxxxxxxxxxxxxxxx/ [1]
>>> Cc: Bartosz Golaszewski <brgl@xxxxxxxx>
>>> Cc: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
>>> Cc: Sean Anderson <sean.anderson@xxxxxxxx>
>>> Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>> (...)
>>
>> In my naive view, this implements the following:
>>
>> reset -> virtual "gpio" -> many physical gpios[0..n]
> 
> It does not, there is no single GPIO here. There is a single reset
> controller, though, but still multiple GPIOs in DTS.
> 
>>
>> So if there was already a way in the kernel to map one GPIO to
>> many GPIOs, the framework could just use that with a simple
>> single GPIO?
>>
>> See the bindings in:
>> Documentation/devicetree/bindings/gpio/gpio-delay.yaml
>>
>> This is handled by drivers/gpio/gpio-aggregator.c.
>>
>> This supports a 1-to-1 map: one GPIO in, one GPIO out, same offset.
>> So if that is extended to support 1-to-many, this problem is solved.
> 
> It does not match the hardware thus I don't know how to implement it in
> DTS while keeping the requirement that we are describing hardware, not
> OS abstractions.
> 
>>
>> Proposed solution: add a single boolean property such as
>> aggregate-all-gpios; to the gpio-delay node, making it provide
>> one single gpio at offset 0 on the consumer side, and refuse any
>> more consumers.
> 
> And how do you solve the reset requirements? The problem is not just to
> share GPIO. The problem is to share in a way that devices operate
> properly when they assert/deassert reset.
> 
>>
>> This will also solve the problem with induced delays on
>> some GPIO lines as I can see was discussed in the bindings,
>> the gpio aggregator already supports that, but it would work
>> fine with a delay being zero as well.
>>
>> This avoids all the hackery with driver stubs etc as well.
> 
> 
> So none of these ideas were posted in previous threads, just because you
> were not CCed (except one thread)?
> 
> https://lore.kernel.org/lkml/20191030120440.3699-1-peter.ujfalusi@xxxxxx/
> https://lore.kernel.org/all/9eebec9b-e6fd-4a22-89ea-b434f446e061@xxxxxxxxxx/
> https://lore.kernel.org/all/20231018100055.140847-1-krzysztof.kozlowski@xxxxxxxxxx/
> https://social.treehouse.systems/@marcan/111268780311634160
> 

And here:

https://lore.kernel.org/all/CAL_JsqL3oZXJJ5_i4BRGpvWu1X8QFB7OGG=D+zLvvWb=UR1mWg@xxxxxxxxxxxxxx/
which the place where this idea of using resets appeared. I agree that
you were not CCed there, but that only means you miss lei filters or
pattern in MAINTAINERS.

Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux