Le 08/01/2015 20:16, Alexandre Belloni a écrit : > Hi, > > > On 08/01/2015 at 20:12:04 +0100, Alexander Stein wrote : >> Now that the implementation has been applied to sound/for-next (https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/log/?h=for-next >> ), who is going to pick the related patches (this one and the other two adding documentation and default config)? >> > > Nicolas will do it but he has not yet started to create a branch for > 3.20. Yes, both first patches added to at91-3.20-dt branch. Thanks, best regards, >> Best regards, >> Alexander >> >> On Monday 29 December 2014, 13:08:41 wrote Alexander Stein: >>> This adds the device node for the ac97 controller. >>> >>> Signed-off-by: Alexander Stein <alexanders83@xxxxxx> >>> Acked-By Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx> >>> --- >>> Changes in v3: >>> * Renamed the compatible string to atmel,at91sam9263-ac97c >>> * Added 'Acked-By Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>' >>> >>> arch/arm/boot/dts/at91sam9263.dtsi | 21 +++++++++++++++++++++ >>> 1 file changed, 21 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi >>> index 6283785..2e67e38 100644 >>> --- a/arch/arm/boot/dts/at91sam9263.dtsi >>> +++ b/arch/arm/boot/dts/at91sam9263.dtsi >>> @@ -700,6 +700,16 @@ >>> }; >>> }; >>> >>> + ac97 { >>> + pinctrl_ac97: ac97-0 { >>> + atmel,pins = >>> + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A AC97FS pin */ >>> + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A AC97CK pin */ >>> + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A AC97TX pin */ >>> + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A AC97RX pin */ >>> + }; >>> + }; >>> + >>> pioA: gpio@fffff200 { >>> compatible = "atmel,at91rm9200-gpio"; >>> reg = <0xfffff200 0x200>; >>> @@ -828,6 +838,17 @@ >>> status = "disabled"; >>> }; >>> >>> + ac97: sound@fffa0000 { >>> + compatible = "atmel,at91sam9263-ac97c"; >>> + reg = <0xfffa0000 0x4000>; >>> + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&pinctrl_ac97>; >>> + clocks = <&ac97_clk>; >>> + clock-names = "ac97_clk"; >>> + status = "disabled"; >>> + }; >>> + >>> macb0: ethernet@fffbc000 { >>> compatible = "cdns,at32ap7000-macb", "cdns,macb"; >>> reg = <0xfffbc000 0x100>; >>> >> > -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
