The wake-on-bt and wake-on-wlan nodes don't have a button- or event-
prefix that the gpio-keys binding requires.
Fix up the node names to satisfy the binding. While at it, also fix up
the GPIO overriding structure for the wake-on-wlan node. Instead of
referencing the gpio-keys node and then open coding the node, add a
label for the event node, and use that to reference and override the
GPIO settings.
Fixes: 055ef10ccdd4 ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board")
Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
---
.../boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts | 8 +++-----
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 2 +-
2 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
index 6a7ae616512d..0d5a11c93c68 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
@@ -17,7 +17,7 @@ bt_wakeup: bt-wakeup {
pinctrl-names = "default";
pinctrl-0 = <&bt_pins_wakeup>;
- wobt {
+ event-wobt {
label = "Wake on BT";
gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
@@ -47,10 +47,8 @@ trackpad@2c {
};
};
-&wifi_wakeup {
- wowlan {
- gpios = <&pio 113 GPIO_ACTIVE_LOW>;
- };
+&wifi_wakeup_event {
+ gpios = <&pio 113 GPIO_ACTIVE_LOW>;
};
&wifi_pwrseq {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index a241bb70cd76..89932984889d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -142,7 +142,7 @@ wifi_wakeup: wifi-wakeup {
pinctrl-names = "default";
pinctrl-0 = <&wifi_pins_wakeup>;
- button-wowlan {
+ wifi_wakeup_event: event-wowlan {
label = "Wake on WiFi";
gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
--
2.43.0.429.g432eaa2c6b-goog
