RE: [EXT] Re: [PATCH v4 4/7] dt-bindings: usb: ci-hdrc-usb2: add restrictions for reg, interrupts, clock and clock-names properties

[Xu Yang <xu.yang_2@xxxxxxx>]

Hi Krzysztof,

> 
> On 19/01/2024 08:19, Xu Yang wrote:
> > Change reg, interrupts, clock and clock-names as common properties and add
> > restrictions on them for different compatibles.
> >
> > Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
> >
> > ---
> > Changes in v4:
> >  - new patch since v3's discussion
> >  - split the reg, interrupts, clock and clock-names properties into
> >    common part and device-specific
> > ---
> >  .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 118 +++++++++++++++---
> >  1 file changed, 102 insertions(+), 16 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-
> hdrc-usb2.yaml
> > index b7e664f7395b..78e30ca0a8ca 100644
> > --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
> > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
> > @@ -73,22 +73,10 @@ properties:
> >                - nuvoton,npcm845-udc
> >            - const: nuvoton,npcm750-udc
> >
> > -  reg:
> > -    minItems: 1
> > -    maxItems: 2
> > -
> > -  interrupts:
> > -    minItems: 1
> > -    maxItems: 2
> > -
> > -  clocks:
> > -    minItems: 1
> > -    maxItems: 3
> > -
> > -  clock-names:
> > -    minItems: 1
> > -    maxItems: 3
> 
> Why all these are gone? They are supposed to be here. Your if:then: only
> customizes them.

I have also concerns of whether to make this part common.
I will revert this later.

> 
> > -
> > +  reg: true
> > +  interrupts: true
> > +  clocks: true
> > +  clock-names: true
> 
> No. These are not booleans on other variants.

Okay.

> 
> >    dr_mode: true
> >
> >    power-domains:
> > @@ -412,6 +400,104 @@ allOf:
> >          samsung,picophy-pre-emp-curr-control: false
> >          samsung,picophy-dc-vol-level-adjust: false
> >
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          oneOf:
> > +            - items:
> > +                - const: fsl,imx27-usb
> 
> No, the syntax you need is contains:.
> 
> Look at existing code - there is no single binding with oneOf: in if: block.

I wonder why 'make dt_binding_check' does not report this issue if the syntax
is not correct?

So I need to add contains as below, right?

  - if:
      properties:
        compatible:
          contains:
            oneOf:
              - items:
                  - const: fsl,imx27-usb
              - items:
                  - enum:
                      - fsl,imx25-usb
                      - fsl,imx35-usb
                  - const: fsl,imx27-usb

The purpose of this code is to match:

  - compatible = "fsl,imx27-usb";
  - compatible = "fsl,imx25-usb", "fsl,imx27-usb";
  - compatible = "fsl,imx35-usb", "fsl,imx27-usb";

but should not match:

  - compatible = "fsl,imx7d-usb", "fsl,imx27-usb";

Is this feasible?

Thanks,
Xu Yang