Document support for clock-frequency and add details on why this property is needed and what values are supported. >From internal documentation, while other values are supported, the correct function of the MDIO bus is not assured hence add only the suggested supported values to the property enum. Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx> Reviewed-by: Andrew Lunn <andrew@xxxxxxx> --- .../bindings/net/qcom,ipq4019-mdio.yaml | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml index 3407e909e8a7..0029e197a825 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml @@ -44,6 +44,21 @@ properties: items: - const: gcc_mdio_ahb_clk + clock-frequency: + description: + The MDIO bus clock that must be output by the MDIO bus hardware, if + absent, the default hardware values are used. + + MDC rate is feed by an external clock (fixed 100MHz) and is divider + internally. The default divider is /256 resulting in the default rate + applied of 390KHz. + + To follow 802.3 standard that instruct up to 2.5MHz by default, if + this property is not declared and the divider is set to /256, by + default 1.5625Mhz is select. + enum: [ 390625, 781250, 1562500, 3125000, 6250000, 12500000 ] + default: 1562500 + required: - compatible - reg -- 2.43.0