Define VBUS regulator and the Type-C handling block as present on the
Quacomm PMI632 PMIC.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Tested-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> # sdm632-fairphone-fp3
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pmi632.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
index 4eb79e0ce40a..d6832f0b7b80 100644
--- a/arch/arm64/boot/dts/qcom/pmi632.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
@@ -45,6 +45,36 @@ pmic@2 {
#address-cells = <1>;
#size-cells = <0>;
+ pmi632_vbus: usb-vbus-regulator@1100 {
+ compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg";
+ reg = <0x1100>;
+ status = "disabled";
+ };
+
+ pmi632_typec: typec@1500 {
+ compatible = "qcom,pmi632-typec";
+ reg = <0x1500>;
+ interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "or-rid-detect-change",
+ "vpd-detect",
+ "cc-state-change",
+ "vconn-oc",
+ "vbus-change",
+ "attach-detach",
+ "legacy-cable-detect",
+ "try-snk-src-detect";
+ vdd-vbus-supply = <&pmi632_vbus>;
+
+ status = "disabled";
+ };
+
pmi632_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
--
2.39.2
