Re: [PATCH V3 2/2] pwm: Add GPIO PWM driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jan 28, 2024 at 05:36:30PM +0100, Stefan Wahren wrote:
> From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
> 
> Add a software PWM which toggles a GPIO from a high-resolution timer.
> 
> This will naturally not be as accurate or as efficient as a hardware
> PWM, but it is useful in some cases.  I have for example used it for
> evaluating LED brightness handling (via leds-pwm) on a board where the
> LED was just hooked up to a GPIO, and for a simple verification of the
> timer frequency on another platform.
> 
> Since high-resolution timers are used, sleeping gpio chips are not
> supported and are rejected in the probe function.
> 
> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
> Co-developed-by: Stefan Wahren <wahrenst@xxxxxxx>
> Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
> ---
>  drivers/pwm/Kconfig    |  11 ++
>  drivers/pwm/Makefile   |   1 +
>  drivers/pwm/pwm-gpio.c | 221 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 233 insertions(+)
>  create mode 100644 drivers/pwm/pwm-gpio.c
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 4b956d661755..7cfda2cde130 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -227,6 +227,17 @@ config PWM_FSL_FTM
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called pwm-fsl-ftm.
> 
> +config PWM_GPIO
> +	tristate "GPIO PWM support"
> +	depends on GPIOLIB
> +	depends on HIGH_RES_TIMERS
> +	help
> +	  Generic PWM framework driver for a software PWM toggling a GPIO pin
> +	  from kernel high-resolution timers.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called pwm-gpio.
> +
>  config PWM_HIBVT
>  	tristate "HiSilicon BVT PWM support"
>  	depends on ARCH_HISI || COMPILE_TEST
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index c5ec9e168ee7..59d1a46bb1af 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_PWM_DWC_CORE)	+= pwm-dwc-core.o
>  obj-$(CONFIG_PWM_DWC)		+= pwm-dwc.o
>  obj-$(CONFIG_PWM_EP93XX)	+= pwm-ep93xx.o
>  obj-$(CONFIG_PWM_FSL_FTM)	+= pwm-fsl-ftm.o
> +obj-$(CONFIG_PWM_GPIO)		+= pwm-gpio.o
>  obj-$(CONFIG_PWM_HIBVT)		+= pwm-hibvt.o
>  obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
>  obj-$(CONFIG_PWM_IMX1)		+= pwm-imx1.o
> diff --git a/drivers/pwm/pwm-gpio.c b/drivers/pwm/pwm-gpio.c
> new file mode 100644
> index 000000000000..14637abe465b
> --- /dev/null
> +++ b/drivers/pwm/pwm-gpio.c
> @@ -0,0 +1,221 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Generic software PWM for modulating GPIOs
> + *
> + * Copyright (C) 2020 Axis Communications AB
> + * Copyright (C) 2020 Nicola Di Lieto
> + * Copyright (C) 2024 Stefan Wahren
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/hrtimer.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
> +#include <linux/spinlock.h>
> +
> +struct pwm_gpio {
> +	struct pwm_chip chip;
> +	struct hrtimer gpio_timer;
> +	struct gpio_desc *gpio;
> +	struct pwm_state state;
> +	struct pwm_state next_state;
> +
> +	/* Protect internal state between pwm_ops and hrtimer */
> +	spinlock_t lock;
> +
> +	bool changing;
> +	bool running;
> +	bool level;
> +};
> +
> +static unsigned long pwm_gpio_toggle(struct pwm_gpio *gpwm, bool level)
> +{
> +	const struct pwm_state *state = &gpwm->state;
> +	bool invert = state->polarity == PWM_POLARITY_INVERSED;
> +
> +	gpwm->level = level;
> +	gpiod_set_value(gpwm->gpio, gpwm->level ^ invert);
> +
> +	if (!state->duty_cycle || state->duty_cycle == state->period) {
> +		gpwm->running = false;
> +		return 0;
> +	}
> +
> +	gpwm->running = true;
> +	return level ? state->duty_cycle : state->period - state->duty_cycle;
> +}
> +
> +static enum hrtimer_restart pwm_gpio_timer(struct hrtimer *gpio_timer)
> +{
> +	struct pwm_gpio *gpwm = container_of(gpio_timer, struct pwm_gpio,
> +					     gpio_timer);
> +	unsigned long next_toggle;
> +	unsigned long flags;
> +	bool new_level;
> +
> +	spin_lock_irqsave(&gpwm->lock, flags);
> +
> +	/* Apply new state at end of current period */
> +	if (!gpwm->level && gpwm->changing) {
> +		gpwm->changing = false;
> +		gpwm->state = gpwm->next_state;
> +		new_level = !!gpwm->state.duty_cycle;
> +	} else {
> +		new_level = !gpwm->level;
> +	}
> +
> +	next_toggle = pwm_gpio_toggle(gpwm, new_level);
> +	if (next_toggle) {
> +		hrtimer_forward(gpio_timer, hrtimer_get_expires(gpio_timer),
> +				ns_to_ktime(next_toggle));
> +	}
> +
> +	spin_unlock_irqrestore(&gpwm->lock, flags);
> +
> +	return next_toggle ? HRTIMER_RESTART : HRTIMER_NORESTART;
> +}
> +
> +static int pwm_gpio_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> +			  const struct pwm_state *state)
> +{
> +	struct pwm_gpio *gpwm = container_of(chip, struct pwm_gpio, chip);
> +	bool invert = state->polarity == PWM_POLARITY_INVERSED;
> +	unsigned long flags;

Not sure this is necessary but how about:

	if (state->duty_cycle < hrtimer_resolution ||
	    state->period - state->duty_cycle < hrtimer_resolution)
		return -EINVAL;

> +
> +	if (!state->enabled) {
> +		hrtimer_cancel(&gpwm->gpio_timer);
> +	} else if (!gpwm->running) {
> +		/*
> +		 * This just enables the output, but pwm_gpio_toggle()
> +		 * really starts the duty cycle.
> +		 */
> +		int ret = gpiod_direction_output(gpwm->gpio, invert);
> +
> +		if (ret)
> +			return ret;
> +	}
> +
> +	spin_lock_irqsave(&gpwm->lock, flags);
> +
> +	if (!state->enabled) {
> +		gpwm->state = *state;
> +		gpwm->running = false;
> +		gpwm->changing = false;
> +
> +		gpiod_set_value(gpwm->gpio, invert);
> +	} else if (gpwm->running) {
> +		gpwm->next_state = *state;
> +		gpwm->changing = true;
> +	} else {
> +		unsigned long next_toggle;
> +
> +		gpwm->state = *state;
> +		gpwm->changing = false;
> +
> +		next_toggle = pwm_gpio_toggle(gpwm, !!state->duty_cycle);
> +		if (next_toggle) {
> +			hrtimer_start(&gpwm->gpio_timer, next_toggle,
> +				      HRTIMER_MODE_REL);
> +		}
> +	}
> +
> +	spin_unlock_irqrestore(&gpwm->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int pwm_gpio_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
> +			       struct pwm_state *state)
> +{
> +	struct pwm_gpio *gpwm = container_of(chip, struct pwm_gpio, chip);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&gpwm->lock, flags);
> +
> +	if (gpwm->changing)
> +		*state = gpwm->next_state;
> +	else
> +		*state = gpwm->state;
> +
> +	spin_unlock_irqrestore(&gpwm->lock, flags);
> +
> +	return 0;
> +}
> +
> +static const struct pwm_ops pwm_gpio_ops = {
> +	.apply = pwm_gpio_apply,
> +	.get_state = pwm_gpio_get_state,
> +};
> +
> +static int pwm_gpio_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct pwm_gpio *gpwm;
> +	int ret;
> +
> +	gpwm = devm_kzalloc(dev, sizeof(*gpwm), GFP_KERNEL);
> +	if (!gpwm)
> +		return -ENOMEM;
> +
> +	spin_lock_init(&gpwm->lock);
> +
> +	gpwm->gpio = devm_gpiod_get(dev, NULL, GPIOD_ASIS);
> +	if (IS_ERR(gpwm->gpio)) {
> +		return dev_err_probe(dev, PTR_ERR(gpwm->gpio),
> +				     "could not get gpio\n");
> +	}
> +
> +	if (gpiod_cansleep(gpwm->gpio)) {
> +		return dev_err_probe(dev, -EINVAL,
> +				     "sleeping GPIO %d not supported\n",
> +				     desc_to_gpio(gpwm->gpio));
> +	}
> +
> +	gpwm->chip.dev = dev;
> +	gpwm->chip.ops = &pwm_gpio_ops;
> +	gpwm->chip.npwm = 1;

	gpwm->chip.atomic = true; ?

> +
> +	hrtimer_init(&gpwm->gpio_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> +	gpwm->gpio_timer.function = pwm_gpio_timer;
> +
> +	ret = pwmchip_add(&gpwm->chip);
> +	if (ret < 0)
> +		return dev_err_probe(dev, ret, "could not add pwmchip\n");
> +
> +	platform_set_drvdata(pdev, gpwm);
> +
> +	return 0;
> +}
> +
> +static void pwm_gpio_remove(struct platform_device *pdev)
> +{
> +	struct pwm_gpio *gpwm = platform_get_drvdata(pdev);
> +
> +	pwmchip_remove(&gpwm->chip);
> +	hrtimer_cancel(&gpwm->gpio_timer);
> +}
> +
> +static const struct of_device_id pwm_gpio_dt_ids[] = {
> +	{ .compatible = "pwm-gpio" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, pwm_gpio_dt_ids);
> +
> +static struct platform_driver pwm_gpio_driver = {
> +	.driver = {
> +		.name = "pwm-gpio",
> +		.of_match_table = pwm_gpio_dt_ids,
> +	},
> +	.probe = pwm_gpio_probe,
> +	.remove_new = pwm_gpio_remove,
> +};
> +module_platform_driver(pwm_gpio_driver);
> +
> +MODULE_DESCRIPTION("PWM GPIO driver");
> +MODULE_ALIAS("platform:pwm-gpio");
> +MODULE_AUTHOR("Vincent Whitchurch");
> +MODULE_LICENSE("GPL");
> --
> 2.34.1
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux