> > Subject: [PATCH v3 2/4] perf: imx_perf: add support for i.MX95 platform > > > > i.MX95 has a DDR PMU which is almostly same as i.MX93, it now supports > > read beat and write beat filter capabilities. This will add support for > > i.MX95 and enhance the driver to support specific filter handling for it. > > > > Usage: > > > > For read beat: > > ~# perf stat -a -I 1000 -e > > imx9_ddr0/eddrtq_pm_rd_beat_filt2,counter=3,axi_mask=ID_MASK,axi_id > > =ID/ > > ~# perf stat -a -I 1000 -e > > imx9_ddr0/eddrtq_pm_rd_beat_filt1,counter=4,axi_mask=ID_MASK,axi_id > > =ID/ > > ~# perf stat -a -I 1000 -e > > imx9_ddr0/eddrtq_pm_rd_beat_filt0,counter=5,axi_mask=ID_MASK,axi_id > > =ID/ > > eg: For edma2: perf stat -a -I 1000 -e > > imx9_ddr0/eddrtq_pm_rd_beat_filt0,counter=5,axi_mask=0x00f,axi_id=0x0 > > 0c/ > > > > For write beat: > > ~# perf stat -a -I 1000 -e > > imx9_ddr0/eddrtq_pm_wr_beat_filt,counter=2,axi_mask=ID_MASK,axi_id= > > ID/ > > eg: For edma2: perf stat -a -I 1000 -e > > imx9_ddr0/eddrtq_pm_wr_beat_filt,counter=2,axi_mask=0x00f,axi_id=0x00 > > c/ > > > > Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx> > > > > --- > > Changes in v2: > > - put soc spefific axi filter events to drvdata according > > to franks suggestions. > > - adjust pmcfg axi_id and axi_mask config > > Changes in v3: > > - no changes > > --- > > drivers/perf/fsl_imx9_ddr_perf.c | 203 +++++++++++++++++++++++++----- > > I suggest you split this two patch. > 1st patch rework imx93 only, which prepare for add imx95. All function is equal. > 2nd patch add imx95. Okay, I'll do that in next vesion. Thanks, Xu Yang
