Re: [PATCH v2 3/3] arm64: dts: exynos: Add SPI nodes for Exynos850

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1/25/24 01:38, Sam Protsenko wrote:
> diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
> index 618bc674896e..ca257da74b50 100644
> --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
> @@ -738,6 +738,24 @@ usi_spi_0: usi@139400c0 {
>  				 <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
>  			clock-names = "pclk", "ipclk";
>  			status = "disabled";
> +
> +			spi_0: spi@13940000 {
> +				compatible = "samsung,exynos850-spi";
> +				reg = <0x13940000 0x30>;
> +				interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-0 = <&spi0_pins>;
> +				pinctrl-names = "default";
> +				clocks = <&cmu_peri CLK_GOUT_SPI0_IPCLK>,
> +					 <&cmu_peri CLK_GOUT_SPI0_PCLK>;
> +				clock-names = "spi_busclk0", "spi";
> +				samsung,spi-src-clk = <0>;

this optional property

> +				dmas = <&pdma0 5>, <&pdma0 4>;
> +				dma-names = "tx", "rx";
> +				num-cs = <1>;

and this one, are already defaults in the driver. Shall you remove them?

> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
>  		};




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux