[PATCH v6 0/4] Add missing port pins on RZ/Five SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Hi All,

This patch series intends to incorporate the absent port pins P19 to P28,
which are exclusively available on the RZ/Five SoC.

Cheers,
Prabhakar

v5 -> v6:
- Rebased the changes due to conflict in pinctrl-rzg2l.c

v4 -> v5:
- Made struct rzg2l_variable_pin_cfg variables u32
- Updated PIN_CFG_PIN_MAP_MASK macro to use GENMASK_ULL() as reported
  by kernel test robot.

v3 -> v4:
- Rebased the changes on top Claudiu's patches
- patch 1/4 is new patch for using FIELD_PREP_CONST/FIELD_GET as
  suggested by Geert
- patch 2/4 adjusted the code again using FIELD_PREP_CONST/FIELD_GET
- patch 3/4 fixed rzg2l_pinctrl_get_variable_pin_cfg() as pointed by Geert
- patch 4/4 is unchanged
- patches 1-3 have been boot tested on g2l family

v2->v3:
- Fixed build warnings for m68k as reported by Kernel test robot.

RFC -> v2:
- Fixed review comments pointed by Geert & Biju

RFC:
Link: https://lore.kernel.org/lkml/20230630120433.49529-3-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/T/

Lad Prabhakar (4):
  pinctrl: renesas: rzg2l: Improve code for readability
  pinctrl: renesas: rzg2l: Include pinmap in RZG2L_GPIO_PORT_PACK()
    macro
  pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28
  riscv: dts: renesas: r9a07g043f: Update gpio-ranges property

 arch/riscv/boot/dts/renesas/r9a07g043f.dtsi |   4 +
 drivers/pinctrl/renesas/pinctrl-rzg2l.c     | 284 +++++++++++++++++---
 2 files changed, 248 insertions(+), 40 deletions(-)

-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux