>Hi Inochi Amaoto
>
>On 10:26 Mon 29 Jan , Inochi Amaoto wrote:
>> Add spi devices for the CV180x, CV181x and SG200x soc.
>>
>> Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxxxx>
>> ---
>> arch/riscv/boot/dts/sophgo/cv18xx.dtsi | 44 ++++++++++++++++++++++++++
>> 1 file changed, 44 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
>> index 7c88cbe8e91d..e66f9e9feb48 100644
>> --- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
>> +++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
>> @@ -176,6 +176,50 @@ uart3: serial@4170000 {
>> status = "disabled";
>> };
>>
>> + spi0: spi@4180000 {
>> + compatible = "snps,dw-apb-ssi";
>> + reg = <0x04180000 0x10000>;
>> + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>;
>> + clock-names = "ssi_clk", "pclk";
>..
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>I'd suggest moving those two above 'interrupts' property
>
>there is an ongoing discussion here..
>https://lore.kernel.org/all/20231203174622.18402-1-krzysztof.kozlowski@xxxxxxxxxx/
>
Thanks for this info. I will take care of it.
>> + status = "disabled";
>> + };
>> +
>> + spi1: spi@4190000 {
>> + compatible = "snps,dw-apb-ssi";
>> + reg = <0x04190000 0x10000>;
>> + interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>;
>> + clock-names = "ssi_clk", "pclk";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi2: spi@41a0000 {
>> + compatible = "snps,dw-apb-ssi";
>> + reg = <0x041a0000 0x10000>;
>> + interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>;
>> + clock-names = "ssi_clk", "pclk";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi3: spi@41b0000 {
>> + compatible = "snps,dw-apb-ssi";
>> + reg = <0x041b0000 0x10000>;
>> + interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>;
>> + clock-names = "ssi_clk", "pclk";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> uart4: serial@41c0000 {
>> compatible = "snps,dw-apb-uart";
>> reg = <0x041c0000 0x100>;
>> --
>> 2.43.0
>
>--
>Yixun Lan (dlan)
>Gentoo Linux Developer
>GPG Key ID AABEFD55
