Samsung Galaxy S5 has many variants. Currently, the only supported one is klte. Samsung Galaxy S5 China (kltechn) is the China edition of klte, and it can mostly work with the klte DTB, with only LEDs and WiFi missing. This patchset splits out the common part of klte DTS into klte-common DTSI, and adds DTS for kltechn by fixing up the GPIO pins for the LEDs and GPIO expander connected by the WiFi module. A "brcm,board-type" property is added into the wifi@1 node of the common DTSI to allow all klte* variants to load the same NVRAM file. Signed-off-by: Rong Zhang <i@xxxxxxxx> --- Changes in v2: - Split out the common part of klte DTS into klte-common DTSI. - Fix dt-binding to make it consistent with kltechn compatible. - Link to v1: https://lore.kernel.org/r/20240121154010.168440-1-i@xxxxxxxx/ --- Rong Zhang (4): ARM: dts: qcom: msm8974: Split out common part of samsung-klte ARM: dts: qcom: msm8974-klte-common: Pin WiFi board type dt-bindings: arm: qcom: Add Samsung Galaxy S5 China (kltechn) ARM: dts: qcom: msm8974: Add DTS for Samsung Galaxy S5 China (kltechn) .../devicetree/bindings/arm/qcom.yaml | 7 + arch/arm/boot/dts/qcom/Makefile | 1 + .../qcom-msm8974pro-samsung-klte-common.dtsi | 818 ++++++++++++++++++ .../dts/qcom/qcom-msm8974pro-samsung-klte.dts | 813 +---------------- .../qcom/qcom-msm8974pro-samsung-kltechn.dts | 16 + 5 files changed, 848 insertions(+), 807 deletions(-) create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts base-commit: 3a5879d495b226d0404098e3564462d5f1daa33b -- 2.43.0
