Add #io-channel-cells expected by driver. i.e., below is the message
seen in kernel log:
OF: /iio-hwmon: could not get #io-channel-cells for /voltage_divider1
TEST=Run below command & make sure there is no error:
make DT_CHECKER_FLAGS=-m dt_binding_check -j1
Signed-off-by: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
index dddf97b50549..b4b5489ad98e 100644
--- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
@@ -39,6 +39,9 @@ properties:
description: |
Channel node of a voltage io-channel.
+ '#io-channel-cells':
+ const: 1
+
output-ohms:
description:
Resistance Rout over which the output voltage is measured. See full-ohms.
base-commit: ecb1b8288dc7ccbdcb3b9df005fa1c0e0c0388a7
--
2.42.0
