On 26/01/2024 04:58, Shenghao Ding wrote:
> PCM6240 driver implements a flexible and configurable setting for register
> and filter coefficients, to one, two or even multiple PCM6240 Family Audio
> chips.
>
Subject: you just ignored my comment...
Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC (and consider --no-git-fallback argument). It might
happen, that command when run on an older kernel, gives you outdated
entries. Therefore please be sure you base your patches on recent Linux
kernel.
Tools like b4 or scripts_getmaintainer.pl provide you proper list of
people, so fix your workflow. Tools might also fail if you work on some
ancient tree (don't, use mainline), work on fork of kernel (don't, use
mainline) or you ignore some maintainers (really don't). Just use b4 and
all the problems go away.
...
> + ti,pcmd3140: Four-channel PDM-input to TDM or I�S output converter.
This does not look like proper encoding.
> +
> + ti,pcmd3180: Eight-channel pulse-density-modulation input to TDM or
> + I�S output converter.
> +
> + ti,taa5212: Low-power high-performance stereo audio ADC with 118-dB
> + dynamic range.
> +
> + ti,tad5212: Low-power stereo audio DAC with 120-dB dynamic range.
> + oneOf:
> + - items:
> + - enum:
> + - ti,adc3120
> + - ti,adc5120
> + - ti,pcm3120
> + - ti,pcm5120
> + - ti,pcm6120
> + - const: ti,adc6120
> + - items:
> + - enum:
> + - ti,pcm6260
> + - ti,pcm6140
> + - ti,pcm3140
> + - ti,pcm5140
> + - const: ti,pcm6240
> + - items:
> + - const: ti,dix4192
> + - const: ti,pcm6240
> + - const: ti,adc6120
It does not make sense. You said above adc6120 is not compatible with
pcm6240.
> + - items:
> + - const: ti,pcm1690
> + - const: ti,pcm9211
> + - const: ti,pcmd512x
> + - items:
> + - enum:
> + - ti,pcmd3180
> + - const: ti,pcmd3140
> + - items:
> + - enum:
> + - taa5412
> + - const: ti,taa5212
> + - items:
> + - enum:
> + - tad5412
> + - const: ti,tad5212
> + - items:
No need for items.
> + - enum:
> + - ti,pcm6240
> + - ti,pcmd3140
> + - ti,taa5212
> + - ti,tad5212
> + - ti,pcmd3180
Where is adc6120 and others?
Missing blank line.
> + reg:
> + description:
> + I2C address, in multiple pcmdevices case, all the i2c address
> + aggregate as one Audio Device to support multiple audio slots.
> + minItems: 1
> + maxItems: 4
> +
> + reset-gpios:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> + description:
> + Invalid only for ti,pcm1690 because of no INT pin.
> +
> + '#sound-dai-cells':
> + const: 0
> +
> +required:
> + - compatible
> + - reg
> +
> +allOf:
> + - $ref: dai-common.yaml#
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,pcm1690
> + then:
> + properties:
> + reg:
> + items:
> + minimum: 0x4c
> + maximum: 0x4f
Nothing improved.
> + interrupts: false
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,adc3120
> + - ti,adc5120
> + - ti,adc6120
> + - ti,pcm3120
> + - ti,pcm5120
> + - ti,pcm6120
> + - ti,pcmd3140
> + then:
> + properties:
> + reg:
> + maxItems: 1
> + items:
> + maximum: 0x4e
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,dix4192
> + then:
> + properties:
> + reg:
> + items:
> + minimum: 0x70
> + maximum: 0x73
Drop entire if
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,pcm6240
> + - ti,pcm6260
> + then:
> + properties:
> + reg:
> + minItems: 1
> + maxItems: 4
> + items:
> + minimum: 0x48
> + maximum: 0x4b
Drop entire if
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,pcm9211
> + then:
> + properties:
> + reg:
> + items:
> + minimum: 0x40
> + maximum: 0x43
Drop entire if
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,taa5212
> + - ti,taa5412
> + - ti,tad5212
> + - ti,tad5412
> + then:
> + properties:
> + reg:
> + items:
> + minimum: 0x50
> + maximum: 0x53
Drop entire if
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + i2c {
> + /* example for two devices with interrupt support */
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pcm6240: audio-codec@48 {
> + compatible = "ti,pcm6240";
> + reg = <0x48>, /* primary-device */
> + <0x4b>; /* secondary-device */
Looks misaligned.
Best regards,
Krzysztof
