Re: [PATCH v3 1/2] arm64: dts: qcom: sm8650-mtp: add PM8010 regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/25/24 01:31, Fenglin Wu via B4 Relay wrote:
> From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
> 
> Add PM8010 regulator device nodes for sm8650-mtp board.
> 
> Signed-off-by: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 132 ++++++++++++++++++++++++++++++++
>  1 file changed, 132 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> index 9d916edb1c73..e440c28e5e9f 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> @@ -428,6 +428,138 @@ vreg_l3i_1p2: ldo3 {
>  						   RPMH_REGULATOR_MODE_HPM>;
>  		};
>  	};
> +
> +	regulators-6 {
> +		compatible = "qcom,pm8010-rpmh-regulators";
> +		qcom,pmic-id = "m";
> +
> +		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
> +		vdd-l3-l4-supply = <&vreg_bob2>;
> +		vdd-l5-supply = <&vreg_s6c_1p8>;
> +		vdd-l6-supply = <&vreg_bob1>;
> +		vdd-l7-supply = <&vreg_bob1>;
> +
> +		vreg_l1m_1p1: ldo1 {
> +			regulator-name = "vreg_l1m_1p1";
> +			regulator-min-microvolt = <1104000>;
> +			regulator-max-microvolt = <1104000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> +						   RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l2m_1p056: ldo2 {
> +			regulator-name = "vreg_l2m_1p056";
> +			regulator-min-microvolt = <1056000>;
> +			regulator-max-microvolt = <1056000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> +						   RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l3m_2p8: ldo3 {
> +			regulator-name = "vreg_l3m_2p8";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l4m_2p8: ldo4 {
> +			regulator-name = "vreg_l4m_2p8";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l5m_1p8: ldo5 {
> +			regulator-name = "vreg_l5m_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l6m_2p8: ldo6 {
> +			regulator-name = "vreg_l6m_2p8";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l7m_2p96: ldo7 {
> +			regulator-name = "vreg_l7m_2p96";
> +			regulator-min-microvolt = <2960000>;
> +			regulator-max-microvolt = <2960000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +
> +	regulators-7 {
> +		compatible = "qcom,pm8010-rpmh-regulators";
> +		qcom,pmic-id = "n";
> +
> +		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
> +		vdd-l3-l4-supply = <&vreg_s6c_1p8>;
> +		vdd-l5-supply = <&vreg_bob2>;
> +		vdd-l6-supply = <&vreg_bob2>;
> +		vdd-l7-supply = <&vreg_bob1>;
> +
> +		vreg_l1n_1p1: ldo1 {
> +			regulator-name = "vreg_l1n_1p1";
> +			regulator-min-microvolt = <1104000>;
> +			regulator-max-microvolt = <1104000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> +						   RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l2n_1p056: ldo2 {
> +			regulator-name = "vreg_l2n_1p056";
> +			regulator-min-microvolt = <1056000>;
> +			regulator-max-microvolt = <1056000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> +						   RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l3n_1p8: ldo3 {
> +			regulator-name = "vreg_l3n_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l4n_1p8: ldo4 {
> +			regulator-name = "vreg_l4n_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l5n_2p8: ldo5 {
> +			regulator-name = "vreg_l5n_2p8";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l6n_2p8: ldo6 {
> +			regulator-name = "vreg_l6n_2p8";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l7n_3p3: ldo7 {
> +			regulator-name = "vreg_l7n_3p3";
> +			regulator-min-microvolt = <3304000>;
> +			regulator-max-microvolt = <3304000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
>  };
>  
>  &dispcc {
> 

Reviewed-by: David Collins <quic_collinsd@xxxxxxxxxxx>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux